Regularly listening noises from your vehicle is never pleasant, so listening wiper sounds on your Jeep Renegade can be troubling. This symptom may be an indication of a moderate issue as well as a warning of a moderate repair to come. No matter the reason, it is useful to verify the source and take the necessary actions to fix the issue, it is with this in mind that we desired to prepare this article content to help you see more clearly. We will first look into the plausible reasons and solutions for dealing with noise from your wipers on your Jeep Renegade. Then, in a second step, we will give you some hints and tips to prevent this type of noise from occurring again.
Wiper blades that makes a squeaking or rubbing noise on Jeep Renegade
A wiper noise on your Jeep Renegade, whether it is a squeak noise or rather a rubbing noise on your windshield, is not pleasant and can distract your concentration while you are driving. It is necessary to stop such a sound. Also, a wiper blade noise is in most cases the signal of a future failure of the wipers, which once worn out will no longer evacuate water well and therefore put you at risk.
Reasons and solutions for wiper noise on your Jeep Renegade
- Examine the wear of your wiper blades. This is the most general origin of noisy wiper blades. Either because of wear and tear and an almost non-existent rubber or because of the sun that will dry and crack your brushes. Consider swapping them in both situations.
- Dirty windshield, verify the level of your windshield washer fluid. One of the causes of rubbing noise can be the cleanliness of your windshield. If it is too dirty, you may notice a wiper noise on your Jeep Renegade, it is up to you to clean it with your windshield washer fluid if appropriate, otherwise use sodium bicarbonate to clean it, it is very effective.
- Examine that your wiper blades are well installed. Indeed, if you feel a kind of jerking of the blades when there is enough rain on your windshield for your wipers to work normally, it is likely that either your arm is a little twisted or the blade attachment is worn. You can verify these two points.
- Examine the tightness of the wiper arm device and that the friction between the windshield and the wipers is not too high. Indeed, when the tightening is too strong, the pressure exerted on the windshield is too strong and a wiper clicking sound on your Jeep Renegade arises.
Some universal recommendations to limit wiper blades noise on your Jeep Renegade
Finally, we will give you some suggestions and warnings to help you expand the life of your wipers and prevent unwanted noise they may provoke during their lifetime.
- Never use dishwashing liquid as windshield washer fluid. Indeed, the purpose of the dishwashing liquid is not to wash windows, in addition if you wanted to use it for this objective, you would have to rinse abundantly because it causes a strong foam not compatible with the simple wiping of the windshield wiper blades. You will therefore encounter an increase in the noise of these.
- Do not wax your windshield, the film that the wax will make may prevent you from seeing the road properly. Indeed, this oily film will create a veil and prevent you from draining water through your windshield wipers in a normal way.
- Do not use your wipers on a frozen windshield, their rubber parts would definitely be damaged by frost. Wait until you have defrosted this one.
- Since dirt is the main reason for the noise made by your windshield wipers, we suggest you not to drive in puddles after storms or heavy rain. Indeed, the puddles will inevitably be full of dirt that will end up on your windshield and trigger noise or deteriorate to your windshield wipers.
