Frequently finding out noises from your car is never enjoyable, so finding out wiper sounds on your Ford Kuga can be worrying. This warning sign may be a sign of a small trouble as well as a warning of a small repair to come. No matter the reason, it is imperative to examine the origin and take the necessary actions to fix the trouble, it is with this in mind that we decided to prepare this content to help you see more clearly. We will first check out the possible reasons and solutions for dealing with noise from your wipers on your Ford Kuga. Then, in a second step, we will give you some hints and tips to prevent this type of noise from going on again.
Wiper blades that makes a squeaking or rubbing noise on Ford Kuga
A wiper noise on your Ford Kuga, whether it is a squeak noise or rather a rubbing noise on your windshield, is not enjoyable and can distract your concentration while you are driving. It is fundamental to eliminate such a sound. Moreover, a wiper blade noise is in most cases the indication of a future failure of the wipers, which once worn out will no longer evacuate water well and therefore put you at risk.
Explanations and solutions for wiper noise on your Ford Kuga
- Check the wear of your wiper blades. This is the most basic trigger of noisy wiper blades. Either because of wear and tear and an almost non-existent rubber or because of the sun that will dry and crack your brushes. Consider replacing them in both circumstances.
- Dirty windshield, verify the level of your windshield washer fluid. One of the causes of rubbing noise can be the cleanliness of your windshield. If it is too dirty, you may acknowledge a wiper noise on your Ford Kuga, it is up to you to clean it with your windshield washer fluid if suitable, otherwise use sodium bicarbonate to clean it, it is very practical.
- Check that your wiper blades are well installed. Indeed, if you feel a kind of jerking of the blades when there is enough rain on your windshield for your wipers to work normally, it is likely that either your arm is a little twisted or the blade attachment is worn. You can verify these two points.
- Check the tightness of the wiper arm mechanism and that the friction between the windshield and the wipers is not too high. Indeed, when the tightening is too strong, the pressure exerted on the windshield is too strong and a wiper clicking sound on your Ford Kuga happens.
Some general recommendations to limit wiper blades noise on your Ford Kuga
To finish , we will give you some suggestions and warnings to help you extend the life of your wipers and prevent unwanted noise they may trigger during their lifetime.
- Never use dishwashing liquid as windshield washer fluid. Indeed, the purpose of the dishwashing liquid is not to wash windows, moreover if you wanted to use it for this objective, you would have to rinse abundantly because it creates a strong foam not compatible with the simple wiping of the windshield wiper blades. You will therefore encounter an increase in the noise of these.
- Do not wax your windshield, the film that the wax will develop may prevent you from seeing the road properly. Indeed, this oily film will create a veil and prevent you from draining water through your windshield wipers in a normal way.
- Do not use your wipers on a frozen windshield, their rubber parts would definitely be damaged by frost. Wait until you have defrosted this one.
- Since dirt is the main reason for the noise generated by your windshield wipers, we suggest you not to drive in puddles after storms or heavy rain. Indeed, the puddles will inevitably be full of dirt that will end up on your windshield and cause noise or destroy to your windshield wipers.
