Repeatedly experiencing noises from your automobile is never pleasant, so experiencing wiper sounds on your Ford Flex can be disturbing. This indication may be a symptom of a slight trouble as well as a warning of a slight repair to come. Whatever the case, it is important to locate the origin and take the necessary measures to correct the trouble, it is with this in mind that we decided to create this content page to support you see more clearly. We will first take a look at the conceivable causes and solutions for dealing with noise from your wipers on your Ford Flex. Then, in a second step, we will give you some suggestions to prevent this type of noise from occurring again.
Wiper blades that makes a squeaking or rubbing noise on Ford Flex
A wiper noise on your Ford Flex, whether it is a squeak noise or rather a rubbing noise on your windshield, is not pleasant and can distract your attention while you are driving. It is important to eliminate such a sound. Moreover, a wiper blade noise is mostly the indicator of a future failure of the wipers, which once worn out will no longer evacuate water well and therefore put you at risk.
Causes and solutions for wiper noise on your Ford Flex
- Verify the wear of your wiper blades. This is the most basic origin of noisy wiper blades. Either because of wear and tear and an almost non-existent rubber or because of the sun that will dry and crack your brushes. Consider changing them in both situations.
- Dirty windshield, verify the level of your windshield washer fluid. One of the causes of rubbing noise can be the cleanliness of your windshield. If it is too dirty, you may listen a wiper noise on your Ford Flex, it is up to you to clean it with your windshield washer fluid if sufficient, otherwise use sodium bicarbonate to clean it, it is very effective.
- Verify that your wiper blades are well installed. In fact, if you feel a kind of jerking of the blades when there is enough rain on your windshield for your wipers to work normally, it is likely that either your arm is a little twisted or the blade attachment is worn. You can verify these two points.
- Verify the tightness of the wiper arm system and that the friction between the windshield and the wipers is not too high. In fact, when the tightening is too strong, the pressure exerted on the windshield is too strong and a wiper clicking sound on your Ford Flex arises.
Some universal suggestions to limit wiper blades noise on your Ford Flex
Finally, we will give you some suggestions and warnings to help you increase the life of your wipers and prevent unwanted noise they may create during their lifetime.
- Never use dishwashing liquid as windshield washer fluid. In fact, the purpose of the dishwashing liquid is not to wash windows, also if you wanted to use it for this reason, you would have to rinse abundantly because it makes a strong foam not compatible with the simple wiping of the windshield wiper blades. You will therefore encounter an increase in the noise of these.
- Do not wax your windshield, the film that the wax will build may prevent you from seeing the road properly. In fact, this oily film will make a veil and prevent you from draining water through your windshield wipers in a normal way.
- Do not use your wipers on a frozen windshield, their rubber parts would definitely be damaged by frost. Wait until you have defrosted this one.
- Since dirt is the main cause for the noise made by your windshield wipers, we encourage you not to drive in puddles after storms or heavy rain. In fact, the puddles will inevitably be full of dirt that will end up on your windshield and cause noise or destroy to your windshield wipers.
