Repeatedly listening noises from your car is never pleasant, so listening wiper sounds on your Chrysler 200 can be distressing. This symptom may be a sign of a slight trouble as well as a warning of a slight repair to come. No matter the reason, it is necessary to locate the origin and take the necessary actions to solve the trouble, it is with this in mind that we decided to produce this content to help you see more clearly. We will first look at the plausible causes and solutions for dealing with noise from your wipers on your Chrysler 200. Then, in a second step, we will give you some advice to prevent this type of noise from going on again.
Wiper blades that causes a squeaking or rubbing noise on Chrysler 200
A wiper noise on your Chrysler 200, whether it is a squeak noise or rather a rubbing noise on your windshield, is not pleasant and can distract your concentration while you are driving. It is important to eliminate such a sound. Also, a wiper blade noise is usually the signal of a future malfunction of the wipers, which once worn out will no longer evacuate water well and therefore put you at risk.
Reasons and solutions for wiper noise on your Chrysler 200
- Examine the wear of your wiper blades. This is the most basic trigger of noisy wiper blades. Either because of wear and tear and an almost non-existent rubber or because of the sun that will dry and crack your brushes. Think about swapping them in both circumstances.
- Dirty windshield, check the level of your windshield washer fluid. One of the triggers of rubbing noise can be the cleanliness of your windshield. If it is too dirty, you may listen a wiper noise on your Chrysler 200, it is up to you to clean it with your windshield washer fluid if sufficient, otherwise use sodium bicarbonate to clean it, it is very practical.
- Examine that your wiper blades are well placed. Indeed, if you feel a kind of jerking of the blades when there is enough rain on your windshield for your wipers to work normally, it is likely that either your arm is a little twisted or the blade attachment is worn. You can check these two points.
- Examine the tightness of the wiper arm mechanism and that the friction between the windshield and the wipers is not too high. Indeed, when the tightening is too strong, the pressure exerted on the windshield is too strong and a wiper clicking sound on your Chrysler 200 happens.
Some general recommendations to limit wiper blades noise on your Chrysler 200
To finish , we will give you some recommendations and warnings to help you expand the life of your wipers and prevent unwanted noise they may reason during their lifetime.
- Never use dishwashing liquid as windshield washer fluid. Indeed, the purpose of the dishwashing liquid is not to wash windows, furthermore if you wanted to use it for this task, you would have to rinse abundantly because it triggers a strong foam not compatible with the simple wiping of the windshield wiper blades. You will therefore experience an increase in the noise of these.
- Do not wax your windshield, the film that the wax will build may prevent you from seeing the road properly. Indeed, this oily film will generate a veil and prevent you from draining water through your windshield wipers in a normal way.
- Do not use your wipers on a frozen windshield, their rubber parts would definitely be damaged by frost. Wait until you have defrosted this one.
- Since dirt is the main explanation for the noise produced by your windshield wipers, we suggest you not to drive in puddles after storms or heavy rain. Indeed, the puddles will inevitably be full of dirt that will end up on your windshield and trigger noise or destroy to your windshield wipers.
