Repeatedly discovering noises from your automobile is never relaxing, so discovering wiper sounds on your Chevrolet Trax can be distressing. This sign may be a symptom of a moderate problem as well as a warning of a moderate service to come. Whatever the case, it is useful to examine the origin and take the necessary measures to solve the problem, it is with this in mind that we wanted to prepare this article to support you see more clearly. We will first take a look at the conceivable reasons and solutions for dealing with noise from your wipers on your Chevrolet Trax. Then, in a second step, we will give you some suggestions to prevent this type of noise from occurring again.
Wiper blades that produces a squeaking or rubbing noise on Chevrolet Trax
A wiper noise on your Chevrolet Trax, whether it is a squeak noise or rather a rubbing noise on your windshield, is not relaxing and can distract your concentration while you are driving. It is important to eliminate such a noise. Moreover, a wiper blade noise is commonly the sign of a future failure of the wipers, which once worn out will no longer evacuate water well and therefore put you at risk.
Reasons and solutions for wiper noise on your Chevrolet Trax
- Check the wear of your wiper blades. This is the most general reason of noisy wiper blades. Either because of wear and tear and an almost non-existent rubber or because of the sun that will dry and crack your brushes. Think about swapping them in both situations.
- Dirty windshield, check the level of your windshield washer fluid. One of the triggers of rubbing noise can be the cleanliness of your windshield. If it is too dirty, you may listen a wiper noise on your Chevrolet Trax, it is up to you to clean it with your windshield washer fluid if suitable, otherwise use sodium bicarbonate to clean it, it is very practical.
- Check that your wiper blades are well positioned. In fact, if you feel a kind of jerking of the blades when there is enough rain on your windshield for your wipers to work normally, it is likely that either your arm is a little twisted or the blade attachment is worn. You can check these two points.
- Check the tightness of the wiper arm system and that the friction between the windshield and the wipers is not too high. In fact, when the tightening is too strong, the pressure exerted on the windshield is too strong and a wiper clicking sound on your Chevrolet Trax comes out.
Some typical suggestions to limit wiper blades noise on your Chevrolet Trax
To finish , we will give you some recommendations and warnings to help you increase the life of your wipers and avoid unwanted noise they may trigger during their lifetime.
- Never use dishwashing liquid as windshield washer fluid. In fact, the purpose of the dishwashing liquid is not to wash windows, moreover if you wanted to use it for this objective, you would have to rinse abundantly because it makes a strong foam not compatible with the simple wiping of the windshield wiper blades. You will therefore experience an increase in the noise of these.
- Do not wax your windshield, the film that the wax will create may prevent you from seeing the road properly. In fact, this oily film will build a veil and prevent you from draining water through your windshield wipers in a normal way.
- Do not use your wipers on a frozen windshield, their rubber parts would definitely be damaged by frost. Wait until you have defrosted this one.
- Since dirt is the main reason for the noise made by your windshield wipers, we suggest you not to drive in puddles after storms or heavy rain. In fact, the puddles will inevitably be full of dirt that will end up on your windshield and cause noise or damage to your windshield wipers.
