Repeatedly discovering noises from your car is never relaxing, so discovering wiper sounds on your Chevrolet Bolt can be stressing. This indicator may be a symptom of a small issue as well as a warning of a small repair to come. In any case, it is important to locate the origin and take the necessary measures to resolve the issue, it is with this in mind that we desired to produce this content page to support you see more clearly. We will first take a look at the plausible reasons and solutions for dealing with noise from your wipers on your Chevrolet Bolt. Then, in a second step, we will give you some advice to prevent this type of noise from going on again.
Wiper blades that generates a squeaking or rubbing noise on Chevrolet Bolt
A wiper noise on your Chevrolet Bolt, whether it is a squeak noise or rather a rubbing noise on your windshield, is not relaxing and can distract your attention while you are driving. It is important to fix such a noise. Moreover, a wiper blade noise is commonly the indicator of a future failure of the wipers, which once worn out will no longer evacuate water well and therefore put you at risk.
Causes and solutions for wiper noise on your Chevrolet Bolt
- Examine the wear of your wiper blades. This is the most basic reason of noisy wiper blades. Either because of wear and tear and an almost non-existent rubber or because of the sun that will dry and crack your brushes. Think about replacing them in both situations.
- Dirty windshield, examine the level of your windshield washer fluid. One of the causes of rubbing noise can be the cleanliness of your windshield. If it is too dirty, you may listen to a wiper noise on your Chevrolet Bolt, it is up to you to clean it with your windshield washer fluid if sufficient, otherwise use sodium bicarbonate to clean it, it is very practical.
- Examine that your wiper blades are well installed. In fact, if you feel a kind of jerking of the blades when there is enough rain on your windshield for your wipers to work normally, it is likely that either your arm is a little twisted or the blade attachment is worn. You can examine these two points.
- Examine the tightness of the wiper arm device and that the friction between the windshield and the wipers is not too high. In fact, when the tightening is too strong, the pressure exerted on the windshield is too strong and a wiper clicking sound on your Chevrolet Bolt shows up.
Some basic tips to limit wiper blades noise on your Chevrolet Bolt
Finally, we will give you some recommendations and warnings to help you increase the life of your wipers and prevent unwanted noise they may create during their lifetime.
- Never use dishwashing liquid as windshield washer fluid. In fact, the purpose of the dishwashing liquid is not to wash windows, in addition if you wanted to use it for this goal, you would have to rinse abundantly because it creates a strong foam not compatible with the simple wiping of the windshield wiper blades. You will therefore experience an increase in the noise of these.
- Do not wax your windshield, the film that the wax will make may prevent you from seeing the road properly. In fact, this oily film will build a veil and prevent you from draining water through your windshield wipers in a normal way.
- Do not use your wipers on a frozen windshield, their rubber parts would definitely be damaged by frost. Wait until you have defrosted this one.
- Since dirt is the main explanation for the noise produced by your windshield wipers, we recommend you not to drive in puddles after storms or heavy rain. In fact, the puddles will inevitably be full of dirt that will end up on your windshield and cause noise or destroy to your windshield wipers.
