It is never relaxing to hear new sounds on your vehicle. We always tend to worry and think about the worst. But finding out wheel noise on Toyota Highlander is very often connected to small problems that you can easily resolve. To support you in this investigation, our team decided to compose this content page to make your life easier and support you in this challenge. To do this, we will alternately see what are the distinctive noises that Toyota Highlander wheels can create and to which malfunctions they are associated.
The diverse wheel noises on Toyota Highlander and their origins
We will therefore concentrate on the different types of sound you may encounter and their sources.
I acknowledge grinding wheel noise on Toyota Highlander from, cardan shaft
The first situation of grinding wheel noise on your Toyota Highlander is that you feel a gimbal sound when you are turning significantly, usually at low speed. It is also plausible that you may encounter this sound when you pass over speed bumps. You should listen to a noise close to a cracking . It is quite plausible in this circumstance that one or more bellows of your gimbals are dead. In this case, the joint must be injured and the transmission may fail. Check the shape of the joint bellows and change them if needed or risk having your vehicle immobilized. If they have cracks, they will promptly dry out and fill with dust or stones that will very fast harm the cardan shaft itself, don’t wait to act! In case you have a sound when you pass on damaged roads but the gimbals are not the reason of it, read this guide about suspension noise on Toyota Highlander to support you find a solution.
I notice a wheel noise Toyota Highlander when coasting due to a bearing
One of the other probable causes of symptoms on the front wheel of your Toyota Highlander when coasting, may be that one of your bearing is good to be swapped, it will tend to generate a thumping sound that intensifies when it is stressed (turns faster and faster). So be sure to check by taking speed (neutral and window open to hear only the noise of the wheels) that the sound is well located here, if this is the case change it or them very quickly. If, on the other hand, this noise only shows up itself with an engaged speed, read this guide about loud noises on Toyota Highlander, you will most likely find a resolution to your issue.
I find out a wheel noise Toyota Highlander due to brakes
If you listen to noise from one or both of your wheels, it is highly plausible that it is your pads or discs that are the cause. Indeed, a disc or a set of dead plates will create a loud metallic sound that you will surely notice. To check this, put your vehicle on axle stands, and control the shape of your discs and pads by taking off the wheel. If they are involved, change them as soon as possible , otherwise you will no longer be able to brake. If you encounter a metallic noise from your Toyota Highlander, but the brakes are not the cause, browse this guide for more information on this issue.
I experience a wheel noise Toyota Highlander linked to faulty wheel alingment
If you encounter a sound that may resemble a vibration and will accentuate as you increase speed, it is plausible that your wheel alingment or balancing is the origin of it. Wheel alingment of a vehicle is a fundamental step that is generally done after each tire swap. It will ensure that the wheel rotates in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and create a significant wheel noise on Toyota Highlander. Examine that your seals are still in position, otherwise go to your garage.
I perceive a wheel noise Toyota Highlander due to wishbone
Finally, you may experience a noise on your Toyota Highlander at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the cause of this issue comes from the double wishbone suspension or the direction hinges. Indeed, you will be able to test a damaged double suspension wishbone during the acceleration phases when it will be pushed on side and the vehicle will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also check the state of the swivel bellows visually, which may affect the action of changing direction. If you are in one of these cases go to your repair shop.
