It is never pleasurable to acknowledge new sounds on your vehicle. We constantly might get worried and think about the worst. But finding out wheel noise on Toyota Aygo is very often relating to small concerns that you can easily fix. To support you in this research, our team decided to compose this content page to make your life easier and help you in this challenge. To do this, we will alternately see what are the different noises that Toyota Aygo wheels can induce and to which failures they are associated.
The different wheel noises on Toyota Aygo and their sources
We will therefore concentrate on the different types of sound you may encounter and their causes.
I listen to grinding wheel noise on Toyota Aygo from, cardan shaft
The first situation of grinding wheel noise on your Toyota Aygo is that you feel a gimbal sound when you are turning significantly, usually at low speed. It is also conceivable that you may encounter this sound when you drive over speed bumps. You should notice a noise close to a cracking . It is quite conceivable in this circumstance that one or more bellows of your gimbals are dead. In this situation, the joint must be damaged and the transmission may fail. Check the state of the joint bellows and change them if needed or risk having your vehicle immobilized. If they have holes, they will very fast dry out and fill with dust or stones that will promptly affect the cardan shaft itself, don’t wait to act! In case you have a sound when you pass on damaged roads but the gimbals are not the cause, have a look at this article about suspension noise on Toyota Aygo to help you find a solution.
I find out a wheel noise Toyota Aygo when coasting caused by a bearing
One of the other probable origins of symptoms on the front wheel of your Toyota Aygo when coasting, may be that one of your bearing is good to be changed, it will tend to generate a thumping sound that intensifies when it is stressed (turns faster and faster). So be sure to check by taking speed (neutral and window open to hear only the noise of the wheels) that the sound is well located here, if this is the case change it or them in short order. If, on the other hand, this noise only manifests itself with an engaged speed, have a look at this article about loud noises on Toyota Aygo, you will most likely find a solution to your problem.
I acknowledge a wheel noise Toyota Aygo caused by brakes
If you listen to noise from one or both of your wheels, it is highly conceivable that it is your pads or discs that are the trigger. Indeed, a disc or a set of dead plates will create a loud metallic sound that you will surely notice. To check this, put your vehicle on axle stands, and control the state of your discs and pads by getting rid of the wheel. If they are involved, change them quickly , otherwise you will no longer be able to brake. If you encounter a metallic noise from your Toyota Aygo, but the brakes are not the cause, read this article for more information on this problem.
I listen to a wheel noise Toyota Aygo connected to faulty wheel alingment
If you encounter a sound that may resemble a vibration and will intensify as you increase speed, it is conceivable that your wheel alingment or balancing is involved. Wheel alingment of a vehicle is an essential step that is generally done after each tire change. It will ensure that the wheel moves in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and induce a significant wheel noise on Toyota Aygo. Examine that your seals are still in position, otherwise go to your mechanic.
I hear a wheel noise Toyota Aygo due to wishbone
Finally, you may feel a noise on your Toyota Aygo at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the cause of this problem comes from the double wishbone suspension or the direction hinges. Indeed, you will be able to test a damaged double suspension wishbone when you accelerate when it will be pushed on side and the car will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also check the condition of the swivel bellows visually, which may disturb the action of changing direction. If you are in one of these cases go to your auto technician.
