It is never pleasurable to experience new noises on your car. We always tend to be anxious and think about the most extreme. But finding out wheel noise on Toyota Auris 2 is very often linked to small issue that you can easily eliminate. To help you in this inspection, our team decided to produce this content page to make your life easier and support you in this task. To do this, we will alternately see what are the different noises that Toyota Auris 2 wheels can provoke and to which malfunctions they are associated.
The different wheel noises on Toyota Auris 2 and their origins
We will therefore focus on the different types of noise you may feel and their sources.
I experience grinding wheel noise on Toyota Auris 2 from, cardan shaft
The first possibility of grinding wheel noise on your Toyota Auris 2 is that you feel a gimbal noise when you are turning significantly, usually at low speed. It is also possible that you may feel this noise when you drive over speed bumps. You should listen to a noise close to a cracking . It is quite possible in this situation that one or more bellows of your gimbals are out of date. In this situation, the joint must be injured and the transmission may fail. Check the shape of the joint bellows and swap them if required or risk having your car immobilized. If they have cracks, they will fairly quickly dry out and fill with dust or stones that will quickly damage the cardan shaft itself, don’t wait to act! In case you have a noise when you pass on damaged roads but the gimbals are not the cause, have a look at this article about suspension noise on Toyota Auris 2 to support you find a solution.
I get a wheel noise Toyota Auris 2 when coasting connected to a bearing
One of the other probable origins of signs on the front wheel of your Toyota Auris 2 when coasting, may be that one of your bearing is good to be changed, it will tend to make a thumping noise that intensifies when it is stressed (turns faster and faster). So make sure to verify by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case swap it or them before long. If, on the other hand, this noise only manifests itself with an engaged speed, have a look at this article about loud noises on Toyota Auris 2, you will most likely find an answer to your issue.
I perceive a wheel noise Toyota Auris 2 connected to brakes
If you knowledge noise from one or both of your wheels, it is highly possible that it is your pads or discs that are the trigger. In fact, a disc or a set of dead plates will create a loud metallic noise that you will inevitably feel. To verify this, put your car on axle stands, and control the shape of your discs and pads by taking out the wheel. If they are involved, swap them fairly quickly , otherwise you will no longer be able to brake. If you feel a metallic noise from your Toyota Auris 2, but the brakes are not the cause, browse this article for more information on this issue.
I notice a wheel noise Toyota Auris 2 due to faulty wheel alingment
If you feel a noise that may resemble a vibration and will intensify as you increase speed, it is possible that your wheel alingment or balancing is the reason of it. Wheel alingment of a car is a major step that is generally done after each tire change. It will ensure that the wheel rotates in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and provoke a significant wheel noise on Toyota Auris 2. Verify that your seals are still in place, otherwise go to your garage.
I experience a wheel noise Toyota Auris 2 caused by wishbone
Finally, you may feel a noise on your Toyota Auris 2 at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the cause of this issue comes from the double wishbone suspension or the direction hinges. In fact, you will be able to test a damaged double suspension wishbone during the acceleration phases when it will be pushed on side and the vehicle will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also verify the condition of the swivel bellows visually, which may disrupt the action of changing direction. If you are in one of these cases go to your auto mechanic.
