It is never pleasurable to notice new noises on your vehicle. We usually might get worried and think about the most extreme. But finding out wheel noise on Suzuki Vitara is very often connected to small issue that you can easily resolve. To help you in this investigation, our team decided to write this article to make your life easier and support you in this process. To do this, we will alternately see what are the distinctive noises that Suzuki Vitara wheels can create and to which malfunctions they are linked.
The different wheel noises on Suzuki Vitara and their sources
We will therefore concentrate on the different types of sound you may encounter and their triggers.
I notice grinding wheel noise on Suzuki Vitara from, cardan shaft
The first situation of grinding wheel noise on your Suzuki Vitara is that you feel a gimbal sound when you are turning significantly, usually at low speed. It is also possible that you may encounter this sound when you pass over speed bumps. You should encounter a noise close to a cracking . It is quite possible in this circumstance that one or more bellows of your gimbals are dead. In this situation, the joint must be weakened and the transmission may fail. Check the condition of the joint bellows and swap them if needed or risk having your vehicle immobilized. If they have cracks, they will very fast dry out and fill with dust or stones that will rather quickly damage the cardan shaft itself, don’t wait to act! In case you have a sound when you pass on damaged roads but the gimbals are not the reason of it, browse this guide about suspension noise on Suzuki Vitara to support you find a solution.
I notice a wheel noise Suzuki Vitara when coasting caused by a bearing
One of the other probable causes of symptoms on the front wheel of your Suzuki Vitara when coasting, may be that one of your bearing is good to be changed, it will tend to produce a thumping sound that intensifies when it is stressed (turns faster and faster). So you should verify by taking speed (neutral and window open to hear only the noise of the wheels) that the sound is well coming from here, if this is the case swap it or them in short order. If, on the other hand, this noise only shows up itself with an engaged speed, browse this guide about loud noises on Suzuki Vitara, you will most likely find an answer to your issue.
I perceive a wheel noise Suzuki Vitara caused by brakes
If you encounter noise from one or both of your wheels, it is highly possible that it is your pads or discs that are the reason. Indeed, a disc or a set of dead plates will make a loud metallic sound that you will obviously feel. To verify this, put your vehicle on axle stands, and control the condition of your discs and pads by getting rid of the wheel. If they are involved, swap them promptly , otherwise you will no longer be able to brake. If you encounter a metallic noise from your Suzuki Vitara, but the brakes are not the cause, browse this guide for more information on this issue.
I listen to a wheel noise Suzuki Vitara connected to faulty wheel alingment
If you encounter a sound that may resemble a vibration and will accentuate as you increase speed, it is possible that your wheel alingment or balancing is the origin of it. Wheel alingment of a vehicle is a fundamental step that is generally done after each tire swap. It will ensure that the wheel moves in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and create a significant wheel noise on Suzuki Vitara. Examine that your seals are still in position, otherwise go to your garage.
I notice a wheel noise Suzuki Vitara connected to wishbone
Finally, you may notice a noise on your Suzuki Vitara at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the reason of this issue comes from the double wishbone suspension or the direction hinges. Indeed, you will be able to test a damaged double suspension wishbone during the acceleration phases when it will be pushed on side and the vehicle will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also verify the state of the swivel bellows visually, which may affect the action of changing direction. If you are in one of these cases go to your auto technician.
