It is never relaxing to find out new noises on your vehicle. We always might be anxious and think about the most extreme. But hearing wheel noise on Scion tC is very often relating to small concerns that you can easily eliminate. To assist you in this investigation, our team decided to create this article to make your life easier and support you in this task. To do this, we will alternately see what are the different noises that Scion tC wheels can provoke and to which malfunctions they are associated.
The diverse wheel noises on Scion tC and their sources
We will therefore focus on the different types of noise you may encounter and their origins.
I notice grinding wheel noise on Scion tC from, cardan shaft
The first possibility of grinding wheel noise on your Scion tC is that you feel a gimbal noise when you are turning significantly, usually at low speed. It is also conceivable that you may encounter this noise when you drive over speed bumps. You should hear a noise close to a cracking . It is quite conceivable in this case that one or more bellows of your gimbals are out of date. In this case, the joint must be damaged and the transmission may fail. Check the shape of the joint bellows and change them if necessary or risk having your vehicle immobilized. If they have cracks, they will in the near future dry out and fill with dust or stones that will promptly harm the cardan shaft itself, don’t wait to act! In case you have a noise when you pass on damaged roads but the gimbals are not the reason of it, browse this guide about suspension noise on Scion tC to support you find a solution.
I perceive a wheel noise Scion tC when coasting connected to a bearing
One of the other possible causes of signs on the front wheel of your Scion tC when coasting, may be that one of your bearing is good to be changed, it will tend to generate a thumping noise that intensifies when it is stressed (turns faster and faster). So make sure to examine by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well coming from here, if this is the case change it or them very quickly. If, on the other hand, this noise only shows up itself with an engaged speed, browse this guide about loud noises on Scion tC, you will most likely find a resolution to your issue.
I perceive a wheel noise Scion tC connected to brakes
If you perceive noise from one or both of your wheels, it is highly conceivable that it is your pads or discs that are the trigger. In fact, a disc or a set of dead plates will generate a loud metallic noise that you will surely feel. To examine this, put your vehicle on axle stands, and control the shape of your discs and pads by getting rid of the wheel. If they are involved, change them as soon as possible , otherwise you will no longer be able to brake. If you encounter a metallic noise from your Scion tC, but the brakes are not the cause, read this guide for more information on this issue.
I listen to a wheel noise Scion tC due to faulty wheel alingment
If you encounter a noise that may look like a vibration and will accentuate as you increase speed, it is conceivable that your wheel alingment or balancing is the reason of it. Wheel alingment of a vehicle is an important step that is generally done after each tire swap. It will ensure that the wheel moves in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and provoke a significant wheel noise on Scion tC. Verify that your seals are still in position, otherwise go to your garage.
I experience a wheel noise Scion tC caused by wishbone
Finally, you may notice a noise on your Scion tC at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the reason of this issue comes from the double wishbone suspension or the direction hinges. In fact, you will be able to test a damaged double suspension wishbone when you are accelerating when it will be pushed on side and the vehicle will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also examine the condition of the swivel bellows visually, which may affect the action of changing direction. If you are in one of these cases go to your mechanic.
