It is never agreeable to hear new sounds on your vehicle. We always will get worried and think about the most severe. But experiencing wheel noise on Opel Adam is very often relating to small problems that you can easily eliminate. To assist you in this inspection, our team decided to compose this content to make your life easier and help you in this process. To do this, we will alternately see what are the distinctive noises that Opel Adam wheels can induce and to which failures they are associated.
The diverse wheel noises on Opel Adam and their sources
We will therefore look at the different types of noise you may encounter and their origins.
I acknowledge grinding wheel noise on Opel Adam from, cardan shaft
The first situation of grinding wheel noise on your Opel Adam is that you feel a gimbal noise when you are turning significantly, usually at low speed. It is also plausible that you may encounter this noise when you pass over speed bumps. You should listen to a noise close to a cracking . It is quite plausible in this case that one or more bellows of your gimbals are dead. In this case, the joint must be damaged and the transmission may fail. Check the shape of the joint bellows and swap them if required or risk having your vehicle immobilized. If they have holes, they will rather quickly dry out and fill with dust or stones that will rather quickly harm the cardan shaft itself, don’t wait to act! In case you have a noise when you pass on damaged roads but the gimbals are not the cause, read this article about suspension noise on Opel Adam to help you find a solution.
I notice a wheel noise Opel Adam when coasting caused by a bearing
One of the other potential causes of symptoms on the front wheel of your Opel Adam when coasting, may be that one of your bearing is good to be swapped, it will tend to make a thumping noise that intensifies when it is stressed (turns faster and faster). So remember to examine by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case swap it or them very quickly. If, on the other hand, this noise only shows up itself with an engaged speed, read this article about loud noises on Opel Adam, you will most likely find an answer to your trouble.
I experience a wheel noise Opel Adam caused by brakes
If you encounter noise from one or both of your wheels, it is highly plausible that it is your pads or discs that are the reason. In fact, a disc or a set of dead plates will create a loud metallic noise that you will undoubtedly feel. To examine this, put your vehicle on axle stands, and examine the shape of your discs and pads by removing the wheel. If they are involved, swap them rather quickly , otherwise you will no longer be able to brake. If you encounter a metallic noise from your Opel Adam, but the brakes are not the cause, browse this article for more information on this trouble.
I listen to a wheel noise Opel Adam linked to faulty wheel alingment
If you encounter a noise that may be like a vibration and will intensify as you increase speed, it is plausible that your wheel alingment or balancing is the origin of it. Wheel alingment of a vehicle is a major step that is generally done after each tire change. It will ensure that the wheel moves in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and induce a significant wheel noise on Opel Adam. Examine that your seals are still set up, otherwise go to your garage.
I listen to a wheel noise Opel Adam caused by wishbone
Finally, you may notice a noise on your Opel Adam at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the trigger of this trouble comes from the double wishbone suspension or the direction hinges. In fact, you will be able to test a damaged double suspension wishbone when you are accelerating when it will be pushed on side and the car will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also examine the condition of the swivel bellows visually, which may affect the action of changing direction. If you are in one of these cases go to your auto mechanic.