It is never pleasing to perceive new noises on your car. We constantly will worry and think about the worst. But hearing wheel noise on Jeep Patriot is very often relating to small problems that you can easily resolve. To support you in this investigation, our team decided to create this content to make your life easier and help you in this process. To do this, we will alternately see what are the distinctive noises that Jeep Patriot wheels can induce and to which failures they are associated.
The diverse wheel noises on Jeep Patriot and their sources
We will therefore concentrate on the different types of sound you may feel and their triggers.
I experience grinding wheel noise on Jeep Patriot from, cardan shaft
The first situation of grinding wheel noise on your Jeep Patriot is that you feel a gimbal sound when you are turning significantly, usually at low speed. It is also plausible that you may feel this sound when you drive over speed bumps. You should encounter a noise close to a cracking . It is quite plausible in this circumstance that one or more bellows of your gimbals are dead. In this case, the joint must be broken and the transmission may fail. Check the state of the joint bellows and swap them if needed or risk having your car immobilized. If they have cracks, they will very fast dry out and fill with dust or stones that will quickly affect the cardan shaft itself, don’t wait to act! In case you have a sound when you pass on damaged roads but the gimbals are not responsible, read this guide about suspension noise on Jeep Patriot to help you find a solution.
I notice a wheel noise Jeep Patriot when coasting linked to a bearing
One of the other potential origins of signs on the front wheel of your Jeep Patriot when coasting, may be that one of your bearing is good to be replaced, it will tend to produce a thumping sound that intensifies when it is stressed (turns faster and faster). So don’t forget to verify by taking speed (neutral and window open to hear only the noise of the wheels) that the sound is well located here, if this is the case swap it or them in short order. If, on the other hand, this noise only manifests itself with an engaged speed, read this guide about loud noises on Jeep Patriot, you will most likely find a resolution to your issue.
I notice a wheel noise Jeep Patriot linked to brakes
If you experience noise from one or both of your wheels, it is highly plausible that it is your pads or discs that are the trigger. Indeed, a disc or a set of dead plates will make a loud metallic sound that you will inevitably feel. To verify this, put your car on axle stands, and verify the state of your discs and pads by taking out the wheel. If they are involved, swap them in short order , otherwise you will no longer be able to brake. If you feel a metallic noise from your Jeep Patriot, but the brakes are not the cause, browse this guide for more details on this issue.
I notice a wheel noise Jeep Patriot connected to faulty wheel alingment
If you feel a sound that may be like a vibration and will accentuate as you increase speed, it is plausible that your wheel alingment or balancing is involved. Wheel alingment of a car is a fundamental step that is generally done after each tire change. It will ensure that the wheel moves in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and induce a significant wheel noise on Jeep Patriot. Check that your seals are still in position, otherwise go to your mechanic.
I find out a wheel noise Jeep Patriot due to wishbone
Finally, you may experience a noise on your Jeep Patriot at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the cause of this issue comes from the double wishbone suspension or the direction hinges. Indeed, you will be able to test a damaged double suspension wishbone while accelerating when it will be pushed on side and the car will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also verify the condition of the swivel bellows visually, which may affect the action of changing direction. If you are in one of these cases go to your repair shop.
