It is never enjoyable to notice new sounds on your automobile. We usually tend to be anxious and think about the worst. But experiencing wheel noise on Hyundai Sonata is very often relating to small trouble that you can easily resolve. To help you in this investigation, our team decided to produce this content page to make your life easier and help you in this task. To do this, we will alternately see what are the different noises that Hyundai Sonata wheels can cause and to which failures they are linked.
The different wheel noises on Hyundai Sonata and their origins
We will therefore concentrate on the different types of noise you may feel and their origins.
I acknowledge grinding wheel noise on Hyundai Sonata from, cardan shaft
The first situation of grinding wheel noise on your Hyundai Sonata is that you feel a gimbal noise when you are turning significantly, usually at low speed. It is also plausible that you may feel this noise when you pass over speed bumps. You should listen to a noise close to a cracking . It is quite plausible in this situation that one or more bellows of your gimbals are out of date. In this situation, the joint must be damaged and the transmission may fail. Check the state of the joint bellows and swap them if required or risk having your automobile immobilized. If they have cracks, they will very fast dry out and fill with dust or stones that will rather quickly affect the cardan shaft itself, don’t wait to act! In case you have a noise when you pass on damaged roads but the gimbals are not the cause, read this guide about suspension noise on Hyundai Sonata to help you find a solution.
I acknowledge a wheel noise Hyundai Sonata when coasting linked to a bearing
One of the other probable causes of signs on the front wheel of your Hyundai Sonata when coasting, may be that one of your bearing is good to be swapped, it will tend to generate a thumping noise that intensifies when it is stressed (turns faster and faster). So be sure you check by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case swap it or them quickly. If, on the other hand, this noise only shows up itself with an engaged speed, read this guide about loud noises on Hyundai Sonata, you will most likely find a resolution to your trouble.
I notice a wheel noise Hyundai Sonata linked to brakes
If you experience noise from one or both of your wheels, it is highly plausible that it is your pads or discs that are the reason. In fact, a disc or a set of dead plates will make a loud metallic noise that you will inevitably feel. To check this, put your automobile on axle stands, and verify the state of your discs and pads by extracting the wheel. If they are involved, swap them in short order , otherwise you will no longer be able to brake. If you feel a metallic noise from your Hyundai Sonata, but the brakes are not the cause, read this guide for more details on this trouble.
I acknowledge a wheel noise Hyundai Sonata caused by faulty wheel alingment
If you feel a noise that may resemble a vibration and will increase as you increase speed, it is plausible that your wheel alingment or balancing is the cause of it. Wheel alingment of a automobile is a major step that is generally done after each tire change. It will ensure that the wheel rotates in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and cause a significant wheel noise on Hyundai Sonata. Check that your seals are still in position, otherwise go to your mechanic.
I find out a wheel noise Hyundai Sonata due to wishbone
Finally, you may experience a noise on your Hyundai Sonata at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the cause of this trouble comes from the double wishbone suspension or the direction hinges. In fact, you will be able to test a damaged double suspension wishbone when you are accelerating when it will be pushed on side and the car will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also check the state of the swivel bellows visually, which may disturb the action of changing direction. If you are in one of these cases go to your repair shop.
