It is never agreeable to listen to new sounds on your vehicle. We always will worry and think about the most extreme. But hearing wheel noise on Hyundai Genesis is very often related to small issue that you can easily fix. To assist you in this investigation, our team decided to compose this content page to make your life easier and support you in this process. To do this, we will alternately see what are the distinctive noises that Hyundai Genesis wheels can cause and to which failures they are linked.
The diverse wheel noises on Hyundai Genesis and their sources
We will therefore concentrate on the different types of noise you may encounter and their causes.
I perceive grinding wheel noise on Hyundai Genesis from, cardan shaft
The first possibility of grinding wheel noise on your Hyundai Genesis is that you feel a gimbal noise when you are turning significantly, usually at low speed. It is also conceivable that you may encounter this noise when you drive over speed bumps. You should hear a noise close to a cracking . It is quite conceivable in this situation that one or more bellows of your gimbals are dead. In this situation, the joint must be destroyed and the transmission may fail. Check the shape of the joint bellows and change them if required or risk having your vehicle immobilized. If they have cracks, they will rather quickly dry out and fill with dust or stones that will fairly quickly damage the cardan shaft itself, don’t wait to act! In case you have a noise when you pass on damaged roads but the gimbals are not responsible, have a look at this article about suspension noise on Hyundai Genesis to support you find a solution.
I find out a wheel noise Hyundai Genesis when coasting connected to a bearing
One of the other probable origins of signs on the front wheel of your Hyundai Genesis when coasting, may be that one of your bearing is good to be changed, it will tend to make a thumping noise that intensifies when it is stressed (turns faster and faster). So make sure to check by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well coming from here, if this is the case change it or them in the near future. If, on the other hand, this noise only shows up itself with an engaged speed, have a look at this article about loud noises on Hyundai Genesis, you will most likely find an answer to your issue.
I acknowledge a wheel noise Hyundai Genesis connected to brakes
If you experience noise from one or both of your wheels, it is highly conceivable that it is your pads or discs that are the reason. In fact, a disc or a set of dead plates will make a loud metallic noise that you will inevitably feel. To check this, put your vehicle on axle stands, and check the shape of your discs and pads by removing the wheel. If they are involved, change them rather quickly , otherwise you will no longer be able to brake. If you encounter a metallic noise from your Hyundai Genesis, but the brakes are not the cause, browse this article for more details on this issue.
I notice a wheel noise Hyundai Genesis caused by faulty wheel alingment
If you encounter a noise that may resemble a vibration and will accentuate as you increase speed, it is conceivable that your wheel alingment or balancing is the origin of it. Wheel alingment of a vehicle is a major step that is generally done after each tire swap. It will ensure that the wheel rotates in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and cause a significant wheel noise on Hyundai Genesis. Check that your seals are still in place, otherwise go to your garage.
I find out a wheel noise Hyundai Genesis attributable to wishbone
Finally, you may feel a noise on your Hyundai Genesis at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the reason of this issue comes from the double wishbone suspension or the direction hinges. In fact, you will be able to test a damaged double suspension wishbone when you are accelerating when it will be pushed on side and the car will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also check the condition of the swivel bellows visually, which may affect the action of changing direction. If you are in one of these cases go to your auto technician.
