It is never pleasant to discover new sounds on your car. We generally will worry and think about the most extreme. But finding out wheel noise on Dodge Charger is very often connected to small problems that you can easily fix. To support you in this investigation, our team decided to compose this content to make your life easier and support you in this challenge. To do this, we will alternately see what are the different noises that Dodge Charger wheels can induce and to which failures they are linked.
The diverse wheel noises on Dodge Charger and their origins
We will therefore focus on the different types of sound you may experience and their origins.
I listen to grinding wheel noise on Dodge Charger from, cardan shaft
The first situation of grinding wheel noise on your Dodge Charger is that you feel a gimbal sound when you are turning significantly, usually at low speed. It is also plausible that you may experience this sound when you pass over speed bumps. You should listen to a noise close to a cracking . It is quite plausible in this situation that one or more bellows of your gimbals are out of date. In this case, the joint must be destroyed and the transmission may fail. Check the condition of the joint bellows and replace them if required or risk having your car immobilized. If they have holes, they will in the near future dry out and fill with dust or stones that will very fast affect the cardan shaft itself, don’t wait to act! In case you have a sound when you pass on damaged roads but the gimbals are not the reason of it, read this guide about suspension noise on Dodge Charger to support you find a solution.
I get a wheel noise Dodge Charger when coasting due to a bearing
One of the other possible causes of symptoms on the front wheel of your Dodge Charger when coasting, may be that one of your bearing is good to be swapped, it will tend to make a thumping sound that intensifies when it is stressed (turns faster and faster). So remember to check by taking speed (neutral and window open to hear only the noise of the wheels) that the sound is well coming from here, if this is the case replace it or them in the near future. If, on the other hand, this noise only manifests itself with an engaged speed, read this guide about loud noises on Dodge Charger, you will most likely find a solution to your problem.
I hear a wheel noise Dodge Charger due to brakes
If you listen to noise from one or both of your wheels, it is highly plausible that it is your pads or discs that are the cause. In fact, a disc or a set of dead plates will make a loud metallic sound that you will undoubtedly notice. To check this, put your car on axle stands, and verify the condition of your discs and pads by getting rid of the wheel. If they are involved, replace them in short order , otherwise you will no longer be able to brake. If you experience a metallic noise from your Dodge Charger, but the brakes are not the cause, browse this guide for more information on this problem.
I hear a wheel noise Dodge Charger linked to faulty wheel alingment
If you experience a sound that may resemble a vibration and will intensify as you increase speed, it is plausible that your wheel alingment or balancing is the cause of it. Wheel alingment of a car is an essential step that is generally done after each tire swap. It will ensure that the wheel rotates in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and induce a significant wheel noise on Dodge Charger. Verify that your seals are still in place, otherwise go to your mechanic.
I perceive a wheel noise Dodge Charger linked to wishbone
Finally, you may notice a noise on your Dodge Charger at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the cause of this problem comes from the double wishbone suspension or the direction hinges. In fact, you will be able to test a damaged double suspension wishbone during the acceleration phases when it will be pushed on side and the vehicle will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also check the condition of the swivel bellows visually, which may affect the action of changing direction. If you are in one of these cases go to your auto mechanic.
