It is never enjoyable to acknowledge new noises on your vehicle. We generally will worry and think about the most extreme. But experiencing wheel noise on Audi Rs4 is very often related to small problems that you can easily eliminate. To help you in this investigation, our team decided to produce this article to make your life easier and support you in this challenge. To do this, we will alternately see what are the different noises that Audi Rs4 wheels can cause and to which failures they are linked.
The different wheel noises on Audi Rs4 and their sources
We will therefore focus on the different types of noise you may experience and their causes.
I listen to grinding wheel noise on Audi Rs4 from, cardan shaft
The first possibility of grinding wheel noise on your Audi Rs4 is that you feel a gimbal noise when you are turning significantly, usually at low speed. It is also possible that you may experience this noise when you drive over speed bumps. You should experience a noise close to a cracking . It is quite possible in this circumstance that one or more bellows of your gimbals are dead. In this case, the joint must be destroyed and the transmission may fail. Check the condition of the joint bellows and replace them if required or risk having your vehicle immobilized. If they have holes, they will very fast dry out and fill with dust or stones that will promptly harm the cardan shaft itself, don’t wait to act! In case you have a noise when you pass on damaged roads but the gimbals are not the cause, browse this article about suspension noise on Audi Rs4 to support you find a solution.
I get a wheel noise Audi Rs4 when coasting connected to a bearing
One of the other potential origins of symptoms on the front wheel of your Audi Rs4 when coasting, may be that one of your bearing is good to be replaced, it will tend to make a thumping noise that intensifies when it is stressed (turns faster and faster). So make sure to examine by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well coming from here, if this is the case replace it or them in short order. If, on the other hand, this noise only manifests itself with an engaged speed, browse this article about loud noises on Audi Rs4, you will most likely find an answer to your issue.
I notice a wheel noise Audi Rs4 connected to brakes
If you experience noise from one or both of your wheels, it is highly possible that it is your pads or discs that are the reason. Indeed, a disc or a set of dead plates will create a loud metallic noise that you will undoubtedly feel. To examine this, put your vehicle on axle stands, and check the condition of your discs and pads by taking off the wheel. If they are involved, replace them quickly , otherwise you will no longer be able to brake. If you experience a metallic noise from your Audi Rs4, but the brakes are not the cause, browse this article for more information on this issue.
I hear a wheel noise Audi Rs4 connected to faulty wheel alingment
If you experience a noise that may be like a vibration and will intensify as you increase speed, it is possible that your wheel alingment or balancing is involved. Wheel alingment of a vehicle is an essential step that is generally done after each tire change. It will ensure that the wheel rotates in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and cause a significant wheel noise on Audi Rs4. Check that your seals are still in place, otherwise go to your mechanic.
I hear a wheel noise Audi Rs4 due to wishbone
Finally, you may experience a noise on your Audi Rs4 at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the reason of this issue comes from the double wishbone suspension or the direction hinges. Indeed, you will be able to test a damaged double suspension wishbone while accelerating when it will be pushed on side and the vehicle will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also examine the condition of the swivel bellows visually, which may disturb the action of changing direction. If you are in one of these cases go to your auto mechanic.
