It is never pleasant to find out new noises on your car. We usually will be anxious and think about the worst. But finding out wheel noise on Acura RDX is very often related to small problems that you can easily resolve. To help you in this research, our team decided to create this article to make your life easier and support you in this process. To do this, we will alternately see what are the different noises that Acura RDX wheels can provoke and to which failures they are associated.
The diverse wheel noises on Acura RDX and their sources
We will therefore concentrate on the different types of noise you may encounter and their triggers.
I perceive grinding wheel noise on Acura RDX from, cardan shaft
The first possibility of grinding wheel noise on your Acura RDX is that you feel a gimbal noise when you are turning significantly, usually at low speed. It is also possible that you may encounter this noise when you drive over speed bumps. You should feel a noise close to a cracking . It is quite possible in this case that one or more bellows of your gimbals are dead. In this situation, the joint must be weakened and the transmission may fail. Check the condition of the joint bellows and swap them if required or risk having your car immobilized. If they have holes, they will in the near future dry out and fill with dust or stones that will rather quickly harm the cardan shaft itself, don’t wait to act! In case you have a noise when you pass on damaged roads but the gimbals are not the cause, browse this guide about suspension noise on Acura RDX to support you find a solution.
I perceive a wheel noise Acura RDX when coasting attributable to a bearing
One of the other probable origins of signs on the front wheel of your Acura RDX when coasting, may be that one of your bearing is tired, it will tend to generate a thumping noise that intensifies when it is stressed (turns faster and faster). So be sure to check by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well coming from here, if this is the case swap it or them quickly. If, on the other hand, this noise only shows up itself with an engaged speed, browse this guide about loud noises on Acura RDX, you will most likely find an answer to your issue.
I notice a wheel noise Acura RDX attributable to brakes
If you perceive noise from one or both of your wheels, it is highly possible that it is your pads or discs that are the trigger. In fact, a disc or a set of dead plates will generate a loud metallic noise that you will undoubtedly feel. To check this, put your car on axle stands, and check the condition of your discs and pads by taking off the wheel. If they are involved, swap them in short order , otherwise you will no longer be able to brake. If you encounter a metallic noise from your Acura RDX, but the brakes are not the cause, browse this guide for more information on this issue.
I notice a wheel noise Acura RDX linked to faulty wheel alingment
If you encounter a noise that may resemble a vibration and will accentuate as you increase speed, it is possible that your wheel alingment or balancing is the reason of it. Wheel alingment of a car is an essential step that is generally done after each tire change. It will ensure that the wheel moves in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and provoke a significant wheel noise on Acura RDX. Check that your seals are still set up, otherwise go to your garage.
I notice a wheel noise Acura RDX linked to wishbone
Finally, you may feel a noise on your Acura RDX at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the reason of this issue comes from the double wishbone suspension or the direction hinges. In fact, you will be able to test a damaged double suspension wishbone while accelerating when it will be pushed on side and the automobile will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also check the condition of the swivel bellows visually, which may disturb the action of changing direction. If you are in one of these cases go to your auto mechanic.
