In some cases your car can make noises in the front axle, you are very certainly not reassured by this sort of noise and you automatically tend to think that you will lose a wheel or that the fix will cost you an astronomical sum. Then, what if you identify a noise coming from the front end of your Volkswagen Atlas? It may not be much and you can resolve the issue yourself, but if in doubt it is better to check before a larger damage shows up. It is with this in mind that we have chosen to write this content and allow you to find the issue and find a treatment. We will, through some steps review all the elements that can make noises at the front end of your Volkswagen Atlas. front-axle-noise-volkswagen-atlas

What are the elements that can cause front axle noise Volkswagen Atlas?

Most of our job will focus on finding the element that gives your Volkswagen Atlas front wheel noise. The following is a list of the components that are most likely to be generating it and how to validate it.

Noise vibration front end Volkswagen Atlas : the shock absorber cup

One of the most classic reason of symptoms on your Volkswagen Atlas front axle noise is advanced wear and tear on your shock system. Indeed, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer assumes its role and during small jolts that compress the suspensions. To check if this is the issue that worries you, take a dented, slow-speed road and pay attention to the noise coming from your front end as you pass over holes. If these are the cups, think about changing them quickly as this may damage other components and require more pricey repairs.

Noise while turning front end Volkswagen Atlas : stabilizer bar

If you detect of a noise on your Volkswagen Atlas at the level of the front end when you are turning flat or climbing on sidewalks for example, it is most likely connected to one of the parts of your stabilizer bar that is malfunctioning. To validate the origin of the issue, you may feel a lack of balance in the direction of the vehicle (it pulls to the left or it pulls to the right). Furthermore, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels vigorously, if you hear a clicking sound it is highly imaginable that your silentblocks of stabilizer bar are dead. In this case, go to your mechanic.

Front axle noise when turning Volkswagen Atlas : direction triangles

Finally, you may have a noise in the front wheel on your Volkswagen Atlas, when you accelerate, brake or in a rather random but regular way. It is likely that the reason of this issue comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (left triangle pulls to the left) and when braking towards the inside of the same side (left triangle pulls to the right). You can also check the state of the swivel bellows visually, which may disrupt the action of changing direction. If you are in one of these cases go to your auto technician.

Loud noise front end Volkswagen Atlas : bearings

One of the other possible causes of symptoms of the front axle of your Volkswagen Atlas, may be that one of your rollings is tired, it will tend to make a thumping noise that raises when it is under stress (turns faster and faster). So make sure you check by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case replace it or them quickly. If, on the other hand, this noise only shows up with an engaged speed, consult our article on loud noise on Volkswagen Atlas, you will probably find a response to your issue.

Front end noise squeaking Volkswagen Atlas : cardan shaft

One of the most traditional causes when noise shows up on the front axle of your Volkswagen Atlas when you turn with your vehicle is linked to the direction of your vehicle. In fact, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can generate “Clac clac” type noises when you get closer to the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Volkswagen Atlas, do not hesitate to consult this article to find the solution to your problem.