On occasion your automobile can make noises in the front right, you are very almost never reassured by this kind of noise and you instantly begin to think that you will loose a wheel or that the fix will cost you an huge sum. So, what if you identify a noise coming from the front right of your Toyota RAV4? It may not be much and you can repair the issue yourself, but if in doubt it is better to check before a larger damage shows up. It is with this in mind that we have decided to produce this document and allow you to find the issue and find a treatment. We will, through some steps review all the components that can create noises at the front right of your Toyota RAV4. front-right-noise-toyota-rav4

What are the parts that can cause front right noise Toyota RAV4?

Most of our article will focus on finding the part that gives your Toyota RAV4 front wheel noise. The following is a list of the components that are most likely to be producing it and how to validate it.

Grinding noise front right wheel Toyota RAV4 : the shock absorber cup

One of the most likely reason of symptoms on your Toyota RAV4 front right wheel noise is advanced wear and tear on your shock unit. Indeed, the suspension cups, when they are out of date, the rubber (silentblock) that works as a buffer and shock absorber for the upper part of the suspension no longer does its task and during small jolts that compress the suspension systems. To check if this is the issue that worries you, take a dented, slow-speed road and pay attention to the noise coming from your front right as you pass over holes. If these are the cups, consider swapping them quickly as this may affect other parts and require more expensive repairs.

Noise while turning front right Toyota RAV4 : stabilizer bar

If you recognise a noise when turning on your front right wheel Toyota RAV4 at the level of the front right when you are turning flat or climbing on sidewalks for example, it is most likely related to one of the parts of your stabilizer bar that is malfunctioning. To validate the origin of the issue, you may find a lack of stability in the direction of the vehicle (it pulls to the right or it pulls to the right). Furthermore, you can position yourself on the right side of your front wheels and try to shake your wheel strongly, if you hear a clicking sound it is highly conceivable that your silentblocks of stabilizer bar are out of date. In this case, go to your mechanic.

Front right noise when turning Toyota RAV4 : direction triangles

Finally, you may have a noise in the front right wheel on your Toyota RAV4, when you are accelerating, brake or at any other random moment. It is likely that the reason of this issue comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (right triangle pulls to the right) and when braking towards the inside of the same side (right triangle pulls to the right). You can also check the state of the swivel bellows visually, which may disturb the action of changing direction. If you are in one of these cases go to your auto mechanic.

Loud knocking or grinding noise front right Toyota RAV4 : bearings

One of the other likely origins of symptoms of the front right grinding or knocking noise on your Toyota RAV4, may be that one of your bearging is tired, it will start to make a thumping noise that intensifies when it is under stress (turns faster and faster). So you should check by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case swap it or them quickly. If, on the other hand, this noise only shows up with an engaged speed, check out our article on loud noises on Toyota RAV4, you will certainly find a solution to your issue.

Front right wheel noise squeaking Toyota RAV4 : cardan shaft

One of the most common causes when noise shows up on the front right of your Toyota RAV4 when you turn with your vehicle is in connection with the direction of your vehicle. Certainly, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can create “Clac clac” type noises when you reach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Toyota RAV4, do not hesitate to consult this article to find the solution to your problem.