Occasionally your vehicle can generate noises in the front right, you are very almost never reassured by this sorts of noise and you instantly begin to presume that you will loose a wheel or that the fix will cost you an astronomical amount. Then, what if you discern a noise coming from the front right of your Toyota Matrix? It may not be much and you can fix the trouble yourself, but if in doubt it is better to check before a larger damage takes place. It is with this in mind that we have decided to make this article and allow you to find the trouble and find a solution. We will, through different steps review all the components that can produce noises at the front right of your Toyota Matrix. 
What are the elements that can generate front right noise Toyota Matrix?
Most of our work will concentrate on finding the part that gives your Toyota Matrix front wheel noise. The following is a list of the elements that are most likely to be causing it and how to confirm it.
Grinding noise front right wheel Toyota Matrix : the shock absorber cup
One of the most classic causes of symptoms on your Toyota Matrix front right wheel noise is advanced wear and tear on your shock unit. In fact, the suspension cups, when they are out of date, the rubber (silentblock) that works as a buffer and shock absorber for the upper part of the suspension no longer assumes its job and during small jolts that compress the suspensions. To check if this is the trouble that worries you, take a dented, slow-speed road and focus on the noise coming from your front right as you pass over holes. If these are the cups, consider changing them as soon as possible as this may damage other components and necessitate more expensive repairs.
Noise while turning front right Toyota Matrix : stabilizer bar
If you recognise a noise when turning on your front right wheel Toyota Matrix at the level of the front right when you are turning flat or going up on sidewalks for example, it is most likely related to one of the parts of your stabilizer bar that is faulty. To confirm the origin of the trouble, you may encounter a lack of stability in the direction of the vehicle (it pulls to the right or it pulls to the right). Moreover, you can position yourself on the right side of your front wheels and try to shake your wheel vigorously, if you hear a clicking sound it is highly possible that your silentblocks of stabilizer bar are out of date. In this case, go to your mechanic.
Front right noise when turning Toyota Matrix : direction triangles
Finally, you may have a noise in the front right wheel on your Toyota Matrix, when you increase the speed of, brake or at any other random moment. It is likely that the cause of this trouble comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (right triangle pulls to the right) and when braking towards the inside of the same side (right triangle pulls to the right). You can also check the condition of the swivel bellows visually, which may disrupt the action of changing direction. If you are in one of these cases go to your mechanic.
Loud knocking or grinding noise front right Toyota Matrix : bearings
One of the other possible origins of symptoms of the front right grinding or knocking noise on your Toyota Matrix, may be that one of your bearging is tired, it will start to make a thumping noise that intensifies when it is under stress (turns faster and faster). So make sure to check by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case replace it or them as soon as possible. If, on the other hand, this noise only appears with an engaged speed, read our article on loud noises on Toyota Matrix, you will certainly find an answer to your trouble.
Front right wheel noise squeaking Toyota Matrix : cardan shaft
One of the most traditional causes when noise appears on the front right of your Toyota Matrix when you turn with your vehicle is in connection with the direction of your vehicle. In fact, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can create “Clac clac” type noises when you reach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Toyota Matrix, do not hesitate to consult this article to find the solution to your problem.
