Occasionally your car can produce noises in the front right, you are very almost never reassured by this kind of noise and you automatically begin to presume that you will loose a wheel or that the repair will cost you an astronomical amount. Thus, what if you recognize a noise coming from the front right of your Toyota C HR? It may not be much and you can correct the trouble yourself, but if in doubt it is better to verify before a larger failure happens. It is with this in mind that we have decided to make this article and allow you to find the trouble and find a solution. We will, through few steps review all the elements that can create noises at the front right of your Toyota C HR. front-right-noise-toyota-c-hr

What are the parts that can cause front right noise Toyota C HR?

Most of our job will focus on finding the part that gives your Toyota C HR front wheel noise. The following is a list of the parts that are most likely to be causing it and how to validate it.

Grinding noise front right wheel Toyota C HR : the shock absorber cup

One of the most common reason of symptoms on your Toyota C HR front right wheel noise is advanced wear and tear on your suspension system. Indeed, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer fulfils its purpose and during small jolts that compress the suspension systems. To verify if this is the trouble that concerns you, take a dented, slow-speed road and listen to the noise coming from your front right as you pass over holes. If these are the cups, think about changing them quickly as this may damage other components and necessitate more pricey repairs.

Noise while turning front right Toyota C HR : stabilizer bar

If you know a noise when turning on your front right wheel Toyota C HR at the level of the front right when you are turning flat or climbing on sidewalks for example, it is most likely related to one of the elements of your stabilizer bar that is defective. To validate the origin of the trouble, you may find a lack of stability in the direction of the car (it pulls to the right or it pulls to the right). Also, you can put yourself on the right side of your front wheels and try to shake your wheel powerfully, if you hear a clicking sound it is highly possible that your silentblocks of stabilizer bar are dead. In this case, go to your mechanic.

Front right noise when turning Toyota C HR : direction triangles

Finally, you may have a noise in the front right wheel on your Toyota C HR, when you accelerate, brake or at any other random moment. It is likely that the reason of this trouble comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (right triangle pulls to the right) and when braking towards the inside of the same side (right triangle pulls to the right). You can also verify the state of the swivel bellows visually, which may disturb the action of changing direction. If you are in one of these cases go to your auto technician.

Loud knocking or grinding noise front right Toyota C HR : bearings

One of the other likely origins of symptoms of the front right grinding or knocking noise on your Toyota C HR, may be that one of your bearging is tired, it will start to make a thumping noise that intensifies when it is under stress (turns faster and faster). So make sure to verify by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case swap it or them quickly. If, on the other hand, this noise only happens with an engaged speed, refer to our article on loud noises on Toyota C HR, you will certainly find a response to your trouble.

Front right wheel noise squeaking Toyota C HR : cardan shaft

One of the most common causes when noise happens on the front right of your Toyota C HR when you turn with your car is connected to the direction of your car. Indeed, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can generate “Clac clac” type noises when you approach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Toyota C HR, do not hesitate to consult this article to find the solution to your problem.