Occasionally your vehicle can produce sounds in the front right, you are very almost never reassured by this kind of noise and you directly begin to think that you will loose a wheel or that the fix will cost you an massive sum. Then, what if you detect a noise coming from the front right of your Toyota C-hr? It may not be much and you can resolve the problem yourself, but if in doubt it is better to check before a larger failure takes place. It is with this in mind that we have chosen to write this document and allow you to locate the problem and find a treatment. We will, through different steps review all the components that can make noises at the front right of your Toyota C-hr. 
What are the parts that can generate front right noise Toyota C-hr?
Most of our job will concentrate on finding the part that gives your Toyota C-hr front wheel noise. The following is a list of the elements that are most likely to be generating it and how to validate it.
Grinding noise front right wheel Toyota C-hr : the shock absorber cup
One of the most likely causes of symptoms on your Toyota C-hr front right wheel noise is advanced wear and tear on your shock system. Indeed, the suspension cups, when they are out of date, the rubber (silentblock) that works as a buffer and shock absorber for the upper part of the suspension no longer does its role and during small jolts that compress the suspensions. To check if this is the problem that concerns you, take a dented, slow-speed road and listen to the noise coming from your front right as you pass over holes. If these are the cups, consider changing them as soon as possible as this may damage other parts and require more pricey repairs.
Noise while turning front right Toyota C-hr : stabilizer bar
If you detect a noise when turning on your front right wheel Toyota C-hr at the level of the front right when you are turning flat or going up on sidewalks for example, it is most likely linked to one of the elements of your stabilizer bar that is defective. To validate the source of the problem, you may encounter a lack of stability in the direction of the vehicle (it pulls to the right or it pulls to the right). Also, you can put yourself on the right side of your front wheels and try to shake your wheel strongly, if you hear a clicking sound it is highly conceivable that your silentblocks of stabilizer bar are out of date. In this case, go to your mechanic.
Front right noise when turning Toyota C-hr : direction triangles
Finally, you may have a noise in the front right wheel on your Toyota C-hr, when you accelerate, brake or at any other random moment. It is likely that the cause of this problem comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (right triangle pulls to the right) and when braking towards the inside of the same side (right triangle pulls to the right). You can also check the condition of the swivel bellows visually, which may affect the action of changing direction. If you are in one of these cases go to your mechanic.
Loud knocking or grinding noise front right Toyota C-hr : bearings
One of the other likely origins of symptoms of the front right grinding or knocking noise on your Toyota C-hr, may be that one of your bearging is tired, it will start to make a thumping noise that intensifies when it is under stress (turns faster and faster). So make sure you check by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case replace it or them as soon as possible. If, on the other hand, this noise only shows up with an engaged speed, read our article on loud noises on Toyota C-hr, you will surely find an answer to your problem.
Front right wheel noise squeaking Toyota C-hr : cardan shaft
One of the most common causes when noise shows up on the front right of your Toyota C-hr when you turn with your vehicle is related to the direction of your vehicle. Certainly, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can create “Clac clac” type noises when you get closer to the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Toyota C-hr, do not hesitate to consult this article to find the solution to your problem.
