Occasionally your car can make noises in the front axle, you are very rarely reassured by this kind of noise and you automatically tend to presume that you will lose a wheel or that the repair will cost you an huge sum. Thus, what if you uncover a noise coming from the front end of your Toyota C-hr? It may not be much and you can correct the issue yourself, but if in doubt it is better to verify before a larger damage takes place. It is with this in mind that we have chosen to write this article and allow you to locate the issue and find a treatment. We will, through few steps review all the elements that can generate noises at the front end of your Toyota C-hr. 
What are the elements that can cause front axle noise Toyota C-hr?
Most of our job will focus on finding the element that gives your Toyota C-hr front wheel noise. The following is a list of the components that are most likely to be creating it and how to verify it.
Noise vibration front end Toyota C-hr : the shock absorber cup
One of the most likely causes of symptoms on your Toyota C-hr front axle noise is advanced wear and tear on your suspension system. Indeed, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer assumes its role and during small jolts that compress the suspensions. To verify if this is the issue that concerns you, take a dented, slow-speed road and pay attention to the noise coming from your front end as you pass over holes. If these are the cups, consider swapping them as soon as possible as this may damage other parts and require more pricey repairs.
Noise while turning front end Toyota C-hr : stabilizer bar
If you know of a noise on your Toyota C-hr at the level of the front end when you are turning flat or climbing on sidewalks for example, it is most likely linked to one of the parts of your stabilizer bar that is defective. To verify the origin of the issue, you may feel a lack of balance in the direction of the car (it pulls to the left or it pulls to the right). Additionally, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels strongly, if you hear a clicking sound it is highly possible that your silentblocks of stabilizer bar are dead. In this case, go to your mechanic.
Front axle noise when turning Toyota C-hr : direction triangles
Finally, you may have a noise in the front wheel on your Toyota C-hr, when you accelerate, brake or in a rather random but regular way. It is likely that the reason of this issue comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (left triangle pulls to the left) and when braking towards the inside of the same side (left triangle pulls to the right). You can also verify the condition of the swivel bellows visually, which may disturb the action of changing direction. If you are in one of these cases go to your auto technician.
Loud noise front end Toyota C-hr : bearings
One of the other likely causes of symptoms of the front axle of your Toyota C-hr, may be that one of your rollings is tired, it will tend to make a thumping noise that intensifies when it is under stress (turns faster and faster). So make sure you verify by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case replace it or them as soon as possible. If, on the other hand, this noise only shows up with an engaged speed, check out our article on loud noise on Toyota C-hr, you will certainly find a fix to your issue.
Front end noise squeaking Toyota C-hr : cardan shaft
One of the most common causes when noise shows up on the front axle of your Toyota C-hr when you turn with your car is in connection with the direction of your car. In fact, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can create “Clac clac” type noises when you approach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Toyota C-hr, do not hesitate to consult this article to find the solution to your problem.
