It is never relaxing to acknowledge a sound on your vehicle you don’t where it comes from. So what if you discern a timing belt noise that persists on your Renault Master 3? It is highly plausible that this is a insignificant issue, but before making sure, it is better to perform some investigations. If this belt noise comes from your timing belt, our team has made this content to help you locate and adjust it. First, we will have a look at the timing belt noises on your Renault Master 3 and then we will look at the causes for these noises.
Noise of timing belt Renault Master 3
The timing belt has an essential role to play. It operates as a conductor and synchronizes the engine crankshaft to the camshaft. It provides the correct transmission of movement to the valves and pistons, which must open at specific moments. It is the link between the top and bottom of the engine. It is sorely tested and wears out over time, it is up to you to respect the manufacturer’s suggestions to swap it at the right moment, we usually talk about years or mileage to respect. Otherwise, you could be the victim of a engine failure.
I listen to a timing belt loud noise on my Renault Master 3 after replacement
If you listen to a loud whistling sound that does not reduce on the timing belt of your Renault Master 3, it can be connected to a circular saw sound. It is more than possible that you will have to worry about it immediately. This can come as a result of a poorly performed belt replacement. Indeed, some mechanician want to save time and do not respect the manufacturer’s stress standards. Indeed, to change a timing belt you must first fix the engine in a certain process, with the right tools. Then, when the belt is reassembled, you will have to manage its tension and comply with the manufacturer’s standard. To do this, we will use a tool called a tensiometer, but unfortunately some garages or mechanics do not apply themselves to one of these two tasks, which actually triggers major concerns for the automobile owner. This leads to an over-tension of the timing belt which is even greater when hot and may eventually break. Bear in mind to take your automobile to a professional to confirm and resolve this problem. If, after verifying, this loud noise does not come from your timing belt, go through this content on loud noises on Renault Master 3 for more info about it. In the other hand, it could be a serpentine noise on Renault Master 3 that you face.
I acknowledge belt noises squealing or squeaking that intensify Renault Master 3
Finally, if you listen to asound from your Renault Master 3’s timing belt, it is urgent to take care of it and take your car to your auto technician or risk engine failure. The cause for this noise is often an end-of-life belt that begins to deteriorate inside the engine motor and whose flaps begin to knock against the inside of the timing gearbox. Hurry to your mechanic. The replacement of a timing belt kit must always be done in advance as part of normal automobile maintenance. If you wait until the failure occurs, it will be too late because the result of a timing belt failure is the failure of your engine. We will generally take this opportunity to change the accessory belt, the tensioning rollers that manage the tension of the belt and the water pump system. If you’re lucky and this noise doesn’t come from your timing belt, check out our content on squeaking noise on Renault Master 3.
