It is never enjoyable to listen a sound on your car you don’t where it comes from. So what if you discern a timing belt noise that continues on your Chrysler 300? It is highly plausible that this is a minor trouble, but before being certain, it is better to carry out some investigations. If this belt noise comes from your timing belt, our team has made this article to help you find and fix it. First, we will have a look at the timing belt noises on your Chrysler 300 and then we will look at the causes for these noises.
Noise of timing belt Chrysler 300
The timing belt has a very important role to play. It operates as a conductor and synchronizes the engine crankshaft to the camshaft. It assures the correct transmission of movement to the valves and pistons, which must open at specific moments. It is the link between the top and bottom of the engine. It is sorely tested and wears out over time, it is up to you to respect the manufacturer’s suggestions to replace it at the right time, we usually talk about years or mileage to respect. Otherwise, you could be the victim of a engine failure.
I listen a timing belt loud noise on my Chrysler 300 after replacement
If you listen a loud whistling sound that does not disappear on the timing belt of your Chrysler 300, it can be connected to a circular saw sound. It is more than credible that you will have to worry about it instantly. This can come as a result of a poorly performed belt replacement. In fact, some professionals want to save time and do not follow the manufacturer’s stress measures. In fact, to change a timing belt you must first lock the engine in a certain way, with the right tools. Then, when the belt is reassembled, you will have to manage its tension and comply with the manufacturer’s standard. To do this, we will use a tool called a tensiometer, but unfortunately some garages or mechanics do not apply themselves to one of these two tasks, which inevitably causes major issues for the vehicle owner. This leads to an over-tension of the timing belt which is even greater when hot and may eventually break. Remember to take your vehicle to a professional to confirm and correct this error. If, after examining, this loud noise does not come from your timing belt, go through this article on loud noises on Chrysler 300 for more information about it. In the other hand, it could be a serpentine noise on Chrysler 300 that you come across.
I notice belt noises squealing or squeaking that intensify Chrysler 300
Finally, if you listen asound from your Chrysler 300’s timing belt, it is urgent to take care of it and take your vehicle to your technician or risk engine failure. The cause for this noise is often an end-of-life belt that begins to destroy inside the engine unit and whose flaps begin to knock against the inside of the timing gearbox. Hurry to your auto technician. The replacement of a timing belt kit must always be done in advance as part of normal vehicle service. If you wait until the failure arises, it will be too late because the result of a timing belt failure is the failure of your engine. We will generally take this opportunity to change the accessory belt, the tensioning rollers that manage the tension of the belt and the water pump system. If you’re lucky and this noise doesn’t come from your timing belt, check out our article on squeaking noise on Chrysler 300.
