Sometimes your car can produce noises in the front right, you are very rarely reassured by this kind of noise and you automatically start to think that you will loose a wheel or that the fix will cost you an massive amount. Then, what if you discern a noise coming from the front right of your Suzuki Alto? It may not be much and you can correct the problem yourself, but if in doubt it is better to verify before a larger failure occurs. It is with this in mind that we have decided to produce this article and allow you to find out the problem and find a treatment. We will, through some steps review all the components that can make noises at the front right of your Suzuki Alto. 
What are the parts that can create front right noise Suzuki Alto?
Most of our article will focus on finding the part that gives your Suzuki Alto front wheel noise. The following is a list of the elements that are most likely to be causing it and how to confirm it.
Grinding noise front right wheel Suzuki Alto : the shock absorber cup
One of the most likely reason of symptoms on your Suzuki Alto front right wheel noise is advanced wear and tear on your suspension unit. In fact, the suspension cups, when they are dead, the rubber (silentblock) that works as a buffer and shock absorber for the upper part of the suspension no longer fulfils its task and during small jolts that compress the suspension systems. To verify if this is the problem that worries you, take a dented, slow-speed road and pay attention to the noise coming from your front right as you pass over holes. If these are the cups, think about swapping them as soon as possible as this may damage other parts and necessitate more expensive repairs.
Noise while turning front right Suzuki Alto : stabilizer bar
If you recognise a noise when turning on your front right wheel Suzuki Alto at the level of the front right when you are turning flat or going up on sidewalks for example, it is most likely connected to one of the composents of your stabilizer bar that is defective. To confirm the origin of the problem, you may encounter a lack of stability in the direction of the vehicle (it pulls to the right or it pulls to the right). In addition, you can position yourself on the right side of your front wheels and try to shake your wheel strongly, if you hear a clicking sound it is highly possible that your silentblocks of stabilizer bar are dead. In this case, go to your mechanic.
Front right noise when turning Suzuki Alto : direction triangles
Finally, you may have a noise in the front right wheel on your Suzuki Alto, when you are accelerating, brake or at any other random moment. It is likely that the reason of this problem comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (right triangle pulls to the right) and when braking towards the inside of the same side (right triangle pulls to the right). You can also verify the condition of the swivel bellows visually, which may disturb the action of changing direction. If you are in one of these cases go to your auto mechanic.
Loud knocking or grinding noise front right Suzuki Alto : bearings
One of the other likely causes of symptoms of the front right grinding or knocking noise on your Suzuki Alto, may be that one of your bearging is tired, it will start to make a thumping noise that raises when it is under stress (turns faster and faster). So be sure you verify by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case swap it or them as soon as possible. If, on the other hand, this noise only happens with an engaged speed, read our article on loud noises on Suzuki Alto, you will certainly find an answer to your problem.
Front right wheel noise squeaking Suzuki Alto : cardan shaft
One of the most traditional causes when noise happens on the front right of your Suzuki Alto when you turn with your vehicle is related to the direction of your vehicle. Certainly, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can generate “Clac clac” type noises when you approach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Suzuki Alto, do not hesitate to consult this article to find the solution to your problem.
