Discovering noises from your car regularly is never reassuring, so listening noises on your Fiat Panda 2 suspensions when you go over a speed bump can be stressing. This indicator may be a sign of a insignificant issue as well as a warning of a much larger repair to come. In any case, it is necessary to check the cause and take the necessary actions to resolve the issue, it is with this intention in mind that we wanted to write this article to help you see more clearly. We will first see the possible reasons for a crack when the speed bump passes, then, what can be the reason of a squeaking noise when a speed bump is being passed and finally what to do if you have another noise when a speed bump is passed.
Suspension cracking noise Fiat Panda 2
Check Fiat Panda 2 suspension
If you notice a suspension noise when you pass a speed bump on your Fiat Panda 2, and it is categorized by a “clack” or cracking, it is highly possible that your suspension block is the cause of it. In fact, it may be the suspension cups, which, when they are old, have the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension that no longer fulfils its function during small bumps that compress the suspensions. To verify if this is the issue that worries you, take a dented road and focus on the noise coming from your front axle as you circulate over holes. If it is indeed the cups, think of replacing them fairly quickly or you may ruin other parts and have to make more important repairs.
Check the cardan shaft
If you are here because you have looked for for “Fiat Panda 2 suspension noise” and the suspension is not the cause of your problem, it may be that the cardan shaft is responsible. In fact, when the cardan bellows get old and the dirt/dust builds up inside them their operation is deteriorated and it is possible to experience a noise when they are in torsion. To verify this, you can try both types of torsion, first vertical with suspension compressions on the speed bump passages, and horizontal when you are going to turn at low speed. If it cracks in these two conditions you should consider replacing it or them. If you have the feeling that this noise is more like a a loud noise on Fiat Panda 2, don’t hesitate to visit this content.
Check steering hinges/stabilizer bar
Finally, when you experience a suspension noise when your Fiat Panda 2 passes over a speed bumps, it is plausible that the hinges or the stabilizer bar are responsible. Just like the gimbals, the steering part is mobilized when you adjust direction. If this is your situation, the parts that may have been damaged by regular wear and tear or impacts (e. g. sidewalks). The steering hinges, the stabilizer bar hinges. can be the origins of your noises, to verify it, position it under the car and apply twists on each of its elements to verify that there is no special play on one of them, they are expected to resist you quite strongly over their entire travel. Please remember to take your Fiat Panda 2 to your technician or replace them if they are involved.
squeaky noise speed bump Fiat Panda 2
Check the stabilizer bar
If, on the other hand, you have a noise that is more like a squeak when you go over a speed bump with your Fiat Panda 2, it is possible that it is the stabilizer bar itself that is involved. In fact, abnormal/pronounced wear of the latter can cause abnormal friction which can cause this squeaking noise. Please remember to verify by passing under your car the condition of the paint on your bar which will tell us if there is friction. Second possible point, it may be your stabilizer bar silentblocks that are dry and create noise, in which case take them out from the cradle and grease them, this should solve the issue.
Check engine silentblocks
Finally, last point that we can verify together, it is the engine silentblocks, in fact, these silentblocks operate as pads/shock absorbers between the engine and the cradle of the car, a evident weakness of these will create a subsidence and therefore a space between the engine and the silentblocks, it may happen that a squeaking noise occurs when you pass a speed bumps or any holes with your Fiat Panda 2. To replace them go to your auto technician.
Other speed bump noise Fiat Panda 2
If, even though all its assumptions, you still can’t locate the source of the noise your Fiat Panda 2 makes when you pass a speed bump, we encourage you to consult this content on a loud noise on Fiat Panda 2 or to visit your technician in order to carry an in-depth check on your Fiat Panda 2 and discover this issue.
