Experiencing regular noises coming from your vehicle is never comforting, so paying attention to strut mount noises on your Mazda 6 can be stressing. This symptom may be a sign of a minor trouble as well as a warning of a much larger fix to come. Whatever the case, it is important to check the origin and take the necessary actions to resolve the trouble, it is with this in mind that we wanted to create this article to support you see more clearly. We will first check out the role and the different types of strut mounts, then, what can be the source of a strut mount noise on your Mazda 6, and what symptoms this means.
The different types of strut mount and their utilities on your Mazda 6
If you encounter strut mount noise on your Mazda 6, you must be able to determine which strut mount are involved. Their main function is to absorb vibrations. We will now look at the different types of strut mount to support you see more clearly and locate and identify them more easily.
Traditional strut mount on Mazda 6
The most typical strut mount is composed of two metal parts, between these two parts, is added a rubber part. The metal parts attach the two components together (example: the vehicle chassis and the engine), and the rubber part comes when it acts as a shock absorber.
strut mount anti-tilting on Mazda 6
This type of block strut mount, generally has the shape of a rod with two elastic parts on either side of it, of each of these two blocks start from the spacers which are utilized to fix each of the parts to be hooked up together. When not represented in this style, it is composed of a cylinder block with a spacer in its center. The assembly being encircled by a metal support, one of the two parts is connected by the rubber part and the other by the spacer.
Balancer strut mount on Mazda 6
Balance type strut mount have a vertical usage, they are generally used as strut mount for the engine block. They are effective in compression and dampen the shocks and shocks that the engine block may endure.
Hydraulic strut mount on Mazda 6
Finally, the hydraulic strut mount is more achieved, which will not rely mainly on the use of rubber as a damping material, but on a hydraulic system filled with oil whose pressure will vary depending to its use and whose control can be done digitally for the most technical.
The different symptoms and noises of strut mount on your Mazda 6
- You feel vibrations, loud noises of silentblocks on your Mazda 6
- You feel jolts when starting your Mazda 6
- Your speeds are jumping or not going well
If you are feeling loud sounds, it is a good bet that some of the strut mount noises of your Mazda 6 are caused by the end of life of one of them. It is now time to identify when the noise happens and from which part of your vehicle it comes. If it is loud noises when you pass over bumps or uneven roads, it may be your engine strut mount or stabilizer bar that are worn. If this loud sound on Mazda 6 doesn’t come from one of your strut mount, read this paper to find others alternatives.
If it is rather during the start that you are feeling jerky feelings and thumping noises coming from a strut mount of your Mazda 6. It may be your engine strut mount that are involved. In the event that the steering is not required and you start straight, it is probably the force produced by the engine and transmission during start-up that causes the engine block to move and the worn strut mount no longer absorb these shocks. It is very easy to swap them, all you need to do is install a hydraulic jack and raise the engine and swap the strut mount on your Mazda 6.
Same as above, if your gears are having trouble shifting, but you feel that your clutch is in good shape and your gearbox is not cracking especially, you will have to consider replacing the engine strut mount on your Mazda 6. Indeed, the vibrations not attenuated by them, will produce a loud strut mount noise on your Mazda 6 and prevent the gears from shifting properly, and will even be able to blow them up.
