Listening regular noises coming from your car is never comforting, so paying attention to strut mount noises on your Mazda 2 can be distressing. This warning sign may be a sign of a minor issue as well as a warning of a much larger fix to come. Whatever the case, it is crucial to verify the source and take the necessary actions to resolve the issue, it is with this in mind that we wanted to compose this paper to help you see more clearly. We will first have a look at the fonction and the different versions of strut mounts, then, what can be the source of a strut mount noise on your Mazda 2, and what symptoms this means.
The different kind of strut mount and their utility on your Mazda 2
If you experience strut mount noise on your Mazda 2, you must be able to determine which strut mount are involved. Their main task is to absorb vibrations. We will now concentrate on the different types of strut mount to help you see more clearly and identify and discover them more easily.
Conventional strut mount on Mazda 2
The most basic strut mount is composed of two metal parts, between these two parts, is added a rubber part. The metal parts attach the two elements together (example: the car chassis and the engine), and the rubber part comes when it acts as a shock absorber.
strut mount anti-tilting on Mazda 2
This types of block strut mount, generally has the shape of a rod with two elastic parts on either side of it, of each of these two blocks start from the spacers which are used to fix each of the parts to be hooked up together. When not represented in this shape, it is constructed of a cylinder block with a spacer in its center. The assembly being encircled by a metal support, one of the two units is connected by the rubber part and the other by the spacer.
Balancer strut mount on Mazda 2
Balance type strut mount have a vertical use, they are most of the time used as strut mount for the engine block. They are effective in compression and dampen the shocks and shocks that the engine block may go through.
Hydraulic strut mount on Mazda 2
Finally, the hydraulic strut mount is more achieved, which will not rely mainly on the use of rubber as a damping material, but on a hydraulic system filled with oil whose pressure will vary depending to its use and whose control can be done electronically for the most technical.
The different symptoms and noises of strut mount on your Mazda 2
- You feel vibrations, loud noises of silentblocks on your Mazda 2
- You feel jolts when starting your Mazda 2
- Your speeds are jumping or not going well
If you are hearing loud noises, it is a good bet that some of the strut mount noises of your Mazda 2 are connected to the end of life of one of them. It is now time to discern when the noise is occurring and from which component of your car it comes. If it is loud noises when you pass over bumps or uneven roads, it may be your engine motor strut mount or stabilizer bar that are worn. If this loud noise on Mazda 2 doesn’t come from one of your strut mount, read this paper to find others solutions.
If it is rather during the start that you are noticing jerky sensations and thumping noises coming from a strut mount of your Mazda 2. It may be your engine strut mount that are involved. In the event that the steering is not required and you start straight, it is most likely the force produced by the engine and transmission during start-up that causes the engine block to move and the worn strut mount no longer absorb these shocks. It is very easy to swap them, all you need to do is install a hydraulic jack and raise the engine and swap the strut mount on your Mazda 2.
Same as above, if your gears are having trouble shifting, but you consider that your clutch is in good state and your gearbox is not cracking especially, you will have to reflect on changing the engine strut mount on your Mazda 2. In fact, the vibrations not attenuated by them, will make a loud strut mount noise on your Mazda 2 and prevent the gears from shifting properly, and will even be able to blow them up.
