You acknowledge a starter motor noise on your Volkswagen Rabbit every time you start your automobile. We agree that this is not agreeable and that you have questions. Discovering such a sound is not always a good sign, but it may also be nothing serious. To support you resolve this issue, our team has decided to compose this content page to support you in this research. First, we will describe how the starter motor functions on your Volkswagen Rabbit, and then what starter motor noises you can know on your Volkswagen Rabbit.
Functioning and various information
Function of a starter motor on Volkswagen Rabbit
The starter motor is an electric motor whose only job is to start the engine unit of your car. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link part between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Volkswagen Rabbit is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Volkswagen Rabbit
- Do not run your starter too long
- Do not use a starter motor on Volkswagen Rabbit with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the climate is too cold. You should not turn your key for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is exhausted, you always want to start your car, the energy it is capable of holding may not be good enough to provide the power needed by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not correct the trigger of your failure to start repeatedly, your starter may be the future component you will have to swap.
I acknowledge noises from the starter motor of my Volkswagen Rabbit, what are the causes?
I experience a loud noise from the starter of my Volkswagen Rabbit
If you hear a starter motor noise on Volkswagen Rabbit and you have the feeling that it is close to a loud noise, it is plausible that it is the starter motor gears that are at the origin of it. Indeed, often when the component has been dismantled for other fixes, its adjustment in relation to the engine flywheel may no longer be perfect, in which circumstance the gears will be worn down over time and will not slip and will no longer properly activate the engine when starting. Verify the state of the drive pinion, if it is the component resposible of the starter motor noise on your Volkswagen Rabbit change it.
If it is a noise in the front of your car but it seems to you after examining not to come from your starter, consult this content page about front end noise on Volkswagen Rabbit which may provide you other leads to solve your noise issue.
I acknowledge a clicking noise of the key running in my neiman but no noise at the starter motor of my Volkswagen Rabbit
If you acknowledge a clicking noise at the starter motor of your Volkswagen Rabbit, there are two possible failures linked to this indicator. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most traditional ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You may have a issue with unplugged cable examine your electrical installation. If after tracking this clicking noise on Volkswagen Rabbit doesn’t come from your starter motor, check this article for more informations.
