You listen a starter motor noise on your Volkswagen Polo 3 every time you start your car. We can understand that this is not agreeable and that you have questions. Experiencing such a sound is not always a good signal, but it may also be nothing severe. To assist you remedy this problem, our team has decided to create this content page to support you in this research. First, we will detail how the starter motor works on your Volkswagen Polo 3, and then what starter motor noises you can know on your Volkswagen Polo 3.
Functioning and various information
Function of a starter motor on Volkswagen Polo 3
The starter motor is an electric motor whose single role is to start the engine unit of your automobile. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link part between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Volkswagen Polo 3 is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Volkswagen Polo 3
- Do not try to start your engine for too long
- Do not use a starter motor on Volkswagen Polo 3 with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the weather conditions is too cold. You should not turn your key for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is drained, you always want to start your automobile, the energy it is capable of holding may not be sufficient to generate the power needed by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not treat the origin of your failure to start repeatedly, your starter may be the future component you will have to replace.
I listen noises from the starter motor of my Volkswagen Polo 3, what are the origins?
I feel a loud noise from the starter of my Volkswagen Polo 3
If you hear a starter motor noise on Volkswagen Polo 3 and you have the feeling that it is close to a loud noise, it is possible that it is the starter motor gears that are at the origin of it. In fact, often when the component has been dismantled for other fixes, its adjustment in relation to the engine flywheel may no longer be ideal, in which situation the gears will be worn down after some time and will not slip and will no longer properly activate the engine when starting. Examine the state of the drive pinion, if it is the element responsible of the starter motor noise on your Volkswagen Polo 3 swap it.
If it is a noise in the front of your automobile but it seems to you after reviewing not to come from your starter, read this content page about front end noise on Volkswagen Polo 3 which may give you other leads to remedy your noise problem.
I listen a clicking noise of the key running in my neiman but no noise at the starter motor of my Volkswagen Polo 3
If you listen a clicking noise at the starter motor of your Volkswagen Polo 3, there are two possible failures connected to this warning sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most common ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You may have a problem with unplugged cable examine your electrical installation. If after examining this clicking noise on Volkswagen Polo 3 doesn’t come from your starter motor, check this article for more informations.
