You perceive a starter motor noise on your Volkswagen Crafter 2 each time you start your automobile. We agree that this is not enjoyable and that you have questions. Listening such a sound is not always a good indication, but it may also be nothing significant. To support you remedy this issue, our team has chosen to prepare this content to assist you in this research. First, we will explain how the starter motor functions on your Volkswagen Crafter 2, and then what starter motor noises you can notice on your Volkswagen Crafter 2.
Functioning and various information
Function of a starter motor on Volkswagen Crafter 2
The starter motor is an electric motor whose single role is to start the engine unit of your vehicle. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link element between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Volkswagen Crafter 2 is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Volkswagen Crafter 2
- Do not run your starter too long
- Do not use a starter motor on Volkswagen Crafter 2 with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the climate is too cold. You should not try to start for more than a few seconds or you will burn it.
Although when you have a battery that is empty, you always want to start your vehicle, the energy it is capable of holding may not be good enough to give the power demanded by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not deal with the origin of your failure to start repeatedly, your starter may be the future component you will have to swap.
I perceive noises from the starter motor of my Volkswagen Crafter 2, what are the triggers?
I feel a loud noise from the starter of my Volkswagen Crafter 2
If you hear a starter motor noise on Volkswagen Crafter 2 and you have the feeling that it is close to a loud noise, it is possible that it is the starter motor gears that are at the source of it. Indeed, often when the component has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be perfect, in which circumstance the gears will be worn down over time and will not slip and will no longer properly activate the engine when starting. Verify the state of the drive pinion, if it is the part responsible of the starter motor noise on your Volkswagen Crafter 2 replace it.
If it is a noise in the front of your vehicle but it seems to you after reviewing not to come from your starter, check this content about front end noise on Volkswagen Crafter 2 which may provide you other leads to resolve your noise issue.
I perceive a clicking noise of the key running in my neiman but no noise at the starter motor of my Volkswagen Crafter 2
If you perceive a clicking noise at the starter motor of your Volkswagen Crafter 2, there are two possible failures related to this indicator. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most traditional ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You may have a issue with unplugged cable verify your electrical installation. If after checking this clicking noise on Volkswagen Crafter 2 doesn’t come from your starter motor, check this article for more informations.
