You listen to a starter motor noise on your Volkswagen Crafter once you start your automobile. We can understand that this is not enjoyable and that you have inquiries. Hearing such a sound is not always a good sign, but it may also be nothing major. To help you fix this problem, our team has chosen to compose this article content to assist you in this research. First, we will explain how the starter motor works on your Volkswagen Crafter, and then what starter motor noises you can know on your Volkswagen Crafter.
Functioning and various information
Function of a starter motor on Volkswagen Crafter
The starter motor is an electric motor whose only job is to start the engine motor of your car. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link part between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Volkswagen Crafter is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Volkswagen Crafter
- Do not run your starter too long
- Do not use a starter motor on Volkswagen Crafter with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the climate is too cold. You should not try to start for more than a few seconds or you will burn it.
Although when you have a battery that is drained, you always want to start your car, the energy it is capable of holding may not be enough to give the power expected by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not correct the origin of your failure to start repeatedly, your starter may be the future part you will have to replace.
I listen to noises from the starter motor of my Volkswagen Crafter, what are the triggers?
I experience a loud noise from the starter of my Volkswagen Crafter
If you listen to a starter motor noise on Volkswagen Crafter and you have the feeling that it is close to a loud noise, it is possible that it is the starter motor gears that are at the source of it. Indeed, often when the part has been dismantled for other maintenance, its adjustment in relation to the engine flywheel may no longer be optimal, in which circumstance the gears will be worn down after some time and will not slip and will no longer properly engage the engine when starting. Check the condition of the drive pinion, if it is the component resposible of the starter motor noise on your Volkswagen Crafter replace it.
If it is a noise in the front of your car but it seems to you after examining not to come from your starter, browse this article content about front end noise on Volkswagen Crafter which may provide you other leads to eliminate your noise problem.
I listen to a clicking noise of the key running in my neiman but no noise at the starter motor of my Volkswagen Crafter
If you listen to a clicking noise at the starter motor of your Volkswagen Crafter, there are two possible failures connected to this indicator. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most common ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You might have a problem with unplugged cable check your electrical installation. If after checking out this clicking noise on Volkswagen Crafter doesn’t come from your starter motor, check this article for more informations.
