You notice a starter motor noise on your Toyota Highlander each time you start your automobile. We agree that this is not enjoyable and that you have inquiries. Discovering such a noise is not always a good signal, but it may also be nothing major. To assist you fix this problem, our team has decided to compose this article to assist you in this research. First, we will describe how the starter motor functions on your Toyota Highlander, and then what starter motor noises you can discover on your Toyota Highlander.
Functioning and various information
Function of a starter motor on Toyota Highlander
The starter motor is an electric motor whose single function is to start the engine unit of your car. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link element between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Toyota Highlander is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Toyota Highlander
- Do not try to start your engine for too long
- Do not use a starter motor on Toyota Highlander with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the weather conditions is too cold. You should not try to start for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is drained, you always want to start your car, the energy it is capable of holding may not be good enough to provide the power expected by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not treat the origin of your failure to start repeatedly, your starter may be the future part you will have to swap.
I notice noises from the starter motor of my Toyota Highlander, what are the reasons?
I feel a loud noise from the starter of my Toyota Highlander
If you perceive a starter motor noise on Toyota Highlander and you have the feeling that it is approaching a loud noise, it is conceivable that it is the starter motor gears that are at the source of it. Indeed, often when the component has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be perfect, in which circumstance the gears will be worn down with time and will not slip and will no longer properly engage the engine when starting. Examine the condition of the drive pinion, if it is the element responsible of the starter motor noise on your Toyota Highlander swap it.
If it is a noise in the front of your car but it seems to you after reviewing not to come from your starter, read this article about front end noise on Toyota Highlander which may offer you other leads to resolve your noise problem.
I notice a clicking noise of the key running in my neiman but no noise at the starter motor of my Toyota Highlander
If you notice a clicking noise at the starter motor of your Toyota Highlander, there are two possible failures linked to this indicator. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most traditional ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You may have a problem with unplugged cable examine your electrical installation. If after tracking this clicking noise on Toyota Highlander doesn’t come from your starter motor, check this article for more informations.
