You hear a starter motor noise on your Subaru Outback every time you start your car. We agree that this is not enjoyable and that you have questions. Listening such a noise is not always a good indication, but it may also be nothing significant. To assist you solve this issue, our team has chosen to write this content page to help you in this research. First, we will explain how the starter motor works on your Subaru Outback, and then what starter motor noises you can know on your Subaru Outback.
Functioning and various information
Function of a starter motor on Subaru Outback
The starter motor is an electric motor whose only job is to start the engine motor of your vehicle. By a magnetic system and a “serial” technology, it will launch an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link element between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Subaru Outback is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Subaru Outback
- Do not try to start your engine for too long
- Do not use a starter motor on Subaru Outback with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the weather is too cold. You should not turn your key for more than a few seconds or you will burn it.
Although when you have a battery that is exhausted, you always want to start your vehicle, the energy it is capable of holding may not be good enough to furnish the power demanded by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not solve the origin of your failure to start repeatedly, your starter may be the future component you will have to replace.
I hear noises from the starter motor of my Subaru Outback, what are the origins?
I feel a loud noise from the starter of my Subaru Outback
If you acknowledge a starter motor noise on Subaru Outback and you have the feeling that it is close to a loud noise, it is conceivable that it is the starter motor gears that are at the source of it. In fact, often when the component has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be appropriate, in which situation the gears will be worn down with time and will not slip and will no longer properly engage the engine when starting. Check the state of the drive pinion, if it is responsible of the starter motor noise on your Subaru Outback replace it.
If it is a noise in the front of your vehicle but it seems to you after reviewing not to come from your starter, read this content page about front end noise on Subaru Outback which may give you other leads to resolve your noise issue.
I hear a clicking noise of the key running in my neiman but no noise at the starter motor of my Subaru Outback
If you hear a clicking noise at the starter motor of your Subaru Outback, there are two possible failures linked to this warning sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most typical ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You may have a issue with unplugged cable verify your electrical installation. If after looking at this clicking noise on Subaru Outback doesn’t come from your starter motor, check this article for more informations.
