You hear a starter motor noise on your saab 9 3 each time you start your automobile. We can understand that this is not pleasant and that you have questions. Listening such a sound is not always a good signal, but it may also be nothing major. To help you solve this problem, our team has decided to prepare this article content to support you in this research. First, we will describe how the starter motor works on your saab 9 3, and then what starter motor noises you can know on your saab 9 3.
Functioning and various information
Function of a starter motor on saab 9 3
The starter motor is an electric motor whose single job is to start the engine of your car. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link element between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your saab 9 3 is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on saab 9 3
- Do not run your starter too long
- Do not use a starter motor on saab 9 3 with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the weather conditions is too cold. You should not try to start for more than a few seconds or you will burn it.
Although when you have a battery that is drained, you always want to start your car, the energy it is capable of holding may not be sufficient to generate the power expected by the starter motor to start your engine. Repeated attempts will pre-use your starter motor and if you do not solve the cause of your failure to start repeatedly, your starter may be the future part you will have to swap.
I hear noises from the starter motor of my saab 9 3, what are the reasons?
I experience a loud noise from the starter of my saab 9 3
If you perceive a starter motor noise on saab 9 3 and you have the feeling that it is approaching a loud noise, it is conceivable that it is the starter motor gears that are at the origin of it. In fact, often when the component has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be perfect, in which circumstance the gears will be worn down with time and will not slip and will no longer properly activate the engine when starting. Check the state of the drive pinion, if it is the part responsible of the starter motor noise on your saab 9 3 change it.
If it is a noise in the front of your car but it seems to you after checking not to come from your starter, read this article content about front end noise on saab 9 3 which may give you other leads to remedy your noise problem.
I hear a clicking noise of the key running in my neiman but no noise at the starter motor of my saab 9 3
If you hear a clicking noise at the starter motor of your saab 9 3, there are two possible failures connected to this indicator. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most traditional ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You could have a problem with unplugged cable examine your electrical installation. If after checking this clicking noise on saab 9 3 doesn’t come from your starter motor, check this article for more informations.
