You experience a starter motor noise on your Renault Clio 2 Campus every time you start your automobile. We agree that this is not pleasant and that you have inquiries. Hearing such a noise is not always a good sign, but it may also be nothing significant. To assist you resolve this issue, our team has decided to produce this content page to assist you in this research. First, we will detail how the starter motor functions on your Renault Clio 2 Campus, and then what starter motor noises you can notice on your Renault Clio 2 Campus.
Functioning and various information
Function of a starter motor on Renault Clio 2 Campus
The starter motor is an electric motor whose single role is to start the engine unit of your car. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link component between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Renault Clio 2 Campus is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Renault Clio 2 Campus
- Do not run your starter too long
- Do not use a starter motor on Renault Clio 2 Campus with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the temperature is too cold. You should not turn your key for more than a few seconds or you will burn it.
Although when you have a battery that is drained, you always want to start your car, the energy it is capable of holding may not be sufficient to provide the power required by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not resolve the reason of your failure to start repeatedly, your starter may be the future component you will have to swap.
I experience noises from the starter motor of my Renault Clio 2 Campus, what are the reasons?
I encounter a loud noise from the starter of my Renault Clio 2 Campus
If you hear a starter motor noise on Renault Clio 2 Campus and you have the feeling that it is close to a loud noise, it is conceivable that it is the starter motor gears that are at the source of it. Indeed, often when the part has been dismantled for other maintenance, its adjustment in relation to the engine flywheel may no longer be appropriate, in which circumstance the gears will be worn down over time and will not slip and will no longer properly activate the engine when starting. Verify the state of the drive pinion, if it is responsible of the starter motor noise on your Renault Clio 2 Campus change it.
If it is a noise in the front of your car but it seems to you after checking not to come from your starter, browse this content page about front end noise on Renault Clio 2 Campus which may provide you other leads to eliminate your noise issue.
I experience a clicking noise of the key running in my neiman but no noise at the starter motor of my Renault Clio 2 Campus
If you experience a clicking noise at the starter motor of your Renault Clio 2 Campus, there are two possible failures relating to this symptom. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most common ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You may have a issue with unplugged cable check your electrical installation. If after checking out this clicking noise on Renault Clio 2 Campus doesn’t come from your starter motor, check this article for more informations.
