You listen a starter motor noise on your Ram P/U once you start your automobile. We can understand that this is not enjoyable and that you have questions. Discovering such a sound is not always a good indication, but it may also be nothing significant. To help you solve this problem, our team has chosen to prepare this content page to assist you in this research. First, we will explain how the starter motor functions on your Ram P/U, and then what starter motor noises you can notice on your Ram P/U.starter-motor-noise-ram-p/u

Functioning and various information

Function of a starter motor on Ram P/U

The starter motor is an electric motor whose sole function is to start the engine of your automobile. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link component between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Ram P/U is activated and turns the drive pinion on the flywheel to start the engine.

How to prevent starter motor noises on Ram P/U

  • Do not try to start your engine for too long

    • Even if your engine does not start because of tired glow plugs, for example, or because the weather is too cold. You should not try to start for more than a few seconds or you will burn your starter motor. In fact, the current essential to make it turn and the speed of rotation only permits it to perform its function over very short and intense periods of time. If the vehicle does not start, look for the solution somewhere else.

  • Do not use a starter motor on Ram P/U with a tired battery

    • Although when you have a battery that is tired, you always want to start your automobile, the energy it is capable of holding may not be sufficient to provide the power required by the starter motor to start your engine. Repeated attempts will pre-use your starter motor and if you do not deal with the origin of your failure to start repeatedly, your starter may be the future part you will have to change.

I listen noises from the starter motor of my Ram P/U, what are the reasons?

I feel a loud noise from the starter of my Ram P/U

If you listen to a starter motor noise on Ram P/U and you have the feeling that it is close to a loud noise, it is possible that it is the starter motor gears that are at the origin of it. In fact, often when the part has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be optimal, in which circumstance the gears will be worn down over time and will not slip and will no longer properly engage the engine when starting. Examine the state of the drive pinion, if it is the element responsible of the starter motor noise on your Ram P/U change it.
If it is a noise in the front of your automobile but it seems to you after checking not to come from your starter, read this content page about front end noise on Ram P/U which may offer you other leads to solve your noise problem.

I listen a clicking noise of the key running in my neiman but no noise at the starter motor of my Ram P/U

If you listen a clicking noise at the starter motor of your Ram P/U, there are two possible failures linked to this sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most classic ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You may have a problem with unplugged cable check your electrical installation. If after tracking this clicking noise on Ram P/U doesn’t come from your starter motor, check this article for more informations.