You hear a starter motor noise on your Peugeot Boxer once you start your car. We can understand that this is not pleasant and that you have inquiries. Experiencing such a sound is not always a good indication, but it may also be nothing major. To assist you remedy this issue, our team has chosen to prepare this article to help you in this research. First, we will describe how the starter motor works on your Peugeot Boxer, and then what starter motor noises you can notice on your Peugeot Boxer.
Functioning and various information
Function of a starter motor on Peugeot Boxer
The starter motor is an electric motor whose single function is to start the engine unit of your car. By a magnetic system and a “serial” technology, it will launch an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link part between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Peugeot Boxer is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Peugeot Boxer
- Do not run your starter too long
- Do not use a starter motor on Peugeot Boxer with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the climate is too cold. You should not turn your key for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is empty, you always want to start your car, the energy it is capable of holding may not be good enough to furnish the power expected by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not solve the reason of your failure to start repeatedly, your starter may be the future component you will have to change.
I hear noises from the starter motor of my Peugeot Boxer, what are the reasons?
I feel a loud noise from the starter of my Peugeot Boxer
If you experience a starter motor noise on Peugeot Boxer and you have the feeling that it is close to a loud noise, it is conceivable that it is the starter motor gears that are at the source of it. Indeed, often when the component has been dismantled for other maintenance, its adjustment in relation to the engine flywheel may no longer be perfect, in which circumstance the gears will be worn down as time passes and will not slip and will no longer properly engage the engine when starting. Check the state of the drive pinion, if it is the element responsible of the starter motor noise on your Peugeot Boxer swap it.
If it is a noise in the front of your car but it seems to you after reviewing not to come from your starter, read this article about front end noise on Peugeot Boxer which may give you other leads to solve your noise issue.
I hear a clicking noise of the key running in my neiman but no noise at the starter motor of my Peugeot Boxer
If you hear a clicking noise at the starter motor of your Peugeot Boxer, there are two possible failures connected to this symptom. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most traditional ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You could have a issue with unplugged cable check your electrical installation. If after checking this clicking noise on Peugeot Boxer doesn’t come from your starter motor, check this article for more informations.
