You listen a starter motor noise on your Peugeot 407 each time you start your car. We can understand that this is not enjoyable and that you have questions. Discovering such a sound is not always a good signal, but it may also be nothing major. To help you resolve this issue, our team has decided to produce this content page to help you in this research. First, we will describe how the starter motor functions on your Peugeot 407, and then what starter motor noises you can notice on your Peugeot 407.
Functioning and various information
Function of a starter motor on Peugeot 407
The starter motor is an electric motor whose single job is to start the engine of your vehicle. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link component between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Peugeot 407 is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Peugeot 407
- Do not run your starter too long
- Do not use a starter motor on Peugeot 407 with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the weather is too cold. You should not turn your key for more than a few seconds or you will burn it.
Although when you have a battery that is exhausted, you always want to start your vehicle, the energy it is capable of holding may not be enough to furnish the power demanded by the starter motor to start your engine. Repeated attempts will pre-use your starter motor and if you do not correct the trigger of your failure to start repeatedly, your starter may be the future component you will have to replace.
I listen noises from the starter motor of my Peugeot 407, what are the origins?
I experience a loud noise from the starter of my Peugeot 407
If you listen to a starter motor noise on Peugeot 407 and you have the feeling that it is approaching a loud noise, it is plausible that it is the starter motor gears that are at the source of it. In fact, often when the part has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be perfect, in which situation the gears will be worn down over time and will not slip and will no longer properly activate the engine when starting. Examine the condition of the drive pinion, if it is the element responsible of the starter motor noise on your Peugeot 407 change it.
If it is a noise in the front of your vehicle but it seems to you after reviewing not to come from your starter, check this content page about front end noise on Peugeot 407 which may provide you other leads to fix your noise issue.
I listen a clicking noise of the key running in my neiman but no noise at the starter motor of my Peugeot 407
If you listen a clicking noise at the starter motor of your Peugeot 407, there are two possible failures relating to this warning sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most typical ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You might have a issue with unplugged cable check your electrical installation. If after checking out this clicking noise on Peugeot 407 doesn’t come from your starter motor, check this article for more informations.
