You listen a starter motor noise on your Peugeot 208 once you start your car. We agree that this is not pleasant and that you have inquiries. Finding out such a noise is not always a good signal, but it may also be nothing major. To help you fix this problem, our team has chosen to write this content to support you in this research. First, we will detail how the starter motor functions on your Peugeot 208, and then what starter motor noises you can encounter on your Peugeot 208.
Functioning and various information
Function of a starter motor on Peugeot 208
The starter motor is an electric motor whose sole job is to start the engine of your vehicle. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link component between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Peugeot 208 is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Peugeot 208
- Do not try to start your engine for too long
- Do not use a starter motor on Peugeot 208 with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the temperature is too cold. You should not try to start for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is tired, you always want to start your vehicle, the energy it is capable of holding may not be good enough to give the power needed by the starter motor to start your engine. Repeated attempts will pre-use your starter motor and if you do not fix the origin of your failure to start repeatedly, your starter may be the future part you will have to replace.
I listen noises from the starter motor of my Peugeot 208, what are the triggers?
I encounter a loud noise from the starter of my Peugeot 208
If you listen a starter motor noise on Peugeot 208 and you have the feeling that it is approaching a loud noise, it is possible that it is the starter motor gears that are at the origin of it. Indeed, often when the component has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be perfect, in which circumstance the gears will be worn down with time and will not slip and will no longer properly activate the engine when starting. Check the state of the drive pinion, if it is the part responsible of the starter motor noise on your Peugeot 208 replace it.
If it is a noise in the front of your vehicle but it seems to you after checking not to come from your starter, browse this content about front end noise on Peugeot 208 which may give you other leads to remedy your noise problem.
I listen a clicking noise of the key running in my neiman but no noise at the starter motor of my Peugeot 208
If you listen a clicking noise at the starter motor of your Peugeot 208, there are two possible failures related to this warning sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most traditional ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You might have a problem with unplugged cable verify your electrical installation. If after checking out this clicking noise on Peugeot 208 doesn’t come from your starter motor, check this article for more informations.
