You perceive a starter motor noise on your Peugeot 207 every time you start your vehicle. We can understand that this is not pleasant and that you have inquiries. Listening such a noise is not always a good sign, but it may also be nothing significant. To assist you resolve this issue, our team has chosen to compose this article content to assist you in this research. First, we will detail how the starter motor functions on your Peugeot 207, and then what starter motor noises you can discover on your Peugeot 207.starter-motor-noise-peugeot-207

Functioning and various information

Function of a starter motor on Peugeot 207

The starter motor is an electric motor whose sole role is to start the engine of your car. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link part between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Peugeot 207 is activated and turns the drive pinion on the flywheel to start the engine.

How to avoid starter motor noises on Peugeot 207

  • Do not run your starter too long
  • Even if your engine does not start because of tired glow plugs, for example, or because the temperature is too cold. You should not try to start for more than a few seconds or you will burn it. Indeed, the current necessary to make it turn and the speed of rotation only permits it to perform its function over very short and intense periods of time. If the car does not start, look for the solution elsewhere.

  • Do not use a starter motor on Peugeot 207 with a tired battery
  • Although when you have a battery that is drained, you always want to start your car, the energy it is capable of holding may not be enough to provide the power required by the starter motor to start your engine. Repeated attempts will pre-use your starter motor and if you do not correct the cause of your failure to start repeatedly, your starter may be the future part you will have to replace.

I perceive noises from the starter motor of my Peugeot 207, what are the causes?

I encounter a loud noise from the starter of my Peugeot 207

If you experience a starter motor noise on Peugeot 207 and you have the feeling that it is approaching a loud noise, it is possible that it is the starter motor gears that are at the source of it. Indeed, often when the component has been dismantled for other fixes, its adjustment in relation to the engine flywheel may no longer be ideal, in which case the gears will be worn down over time and will not slip and will no longer properly engage the engine when starting. Verify the condition of the drive pinion, if it is the part responsible of the starter motor noise on your Peugeot 207 replace it.
If it is a noise in the front of your car but it seems to you after examining not to come from your starter, check this article content about front end noise on Peugeot 207 which may give you other leads to remedy your noise issue.

I perceive a clicking noise of the key running in my neiman but no noise at the starter motor of my Peugeot 207

If you perceive a clicking noise at the starter motor of your Peugeot 207, there are two possible failures related to this sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most typical ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You may have a issue with unplugged cable check your electrical installation. If after checking this clicking noise on Peugeot 207 doesn’t come from your starter motor, check this article for more informations.