You acknowledge a starter motor noise on your Peugeot 2008 once you start your vehicle. We agree that this is not pleasant and that you have questions. Experiencing such a sound is not always a good indication, but it may also be nothing severe. To help you remedy this trouble, our team has decided to write this article to help you in this research. First, we will describe how the starter motor works on your Peugeot 2008, and then what starter motor noises you can know on your Peugeot 2008.
Functioning and various information
Function of a starter motor on Peugeot 2008
The starter motor is an electric motor whose single job is to start the engine unit of your vehicle. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link part between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Peugeot 2008 is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Peugeot 2008
- Do not try to start your engine for too long
- Do not use a starter motor on Peugeot 2008 with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the weather is too cold. You should not turn your key for more than a few seconds or you will burn it.
Although when you have a battery that is empty, you always want to start your vehicle, the energy it is capable of holding may not be enough to generate the power demanded by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not treat the trigger of your failure to start repeatedly, your starter may be the future component you will have to replace.
I acknowledge noises from the starter motor of my Peugeot 2008, what are the causes?
I encounter a loud noise from the starter of my Peugeot 2008
If you perceive a starter motor noise on Peugeot 2008 and you have the feeling that it is approaching a loud noise, it is plausible that it is the starter motor gears that are at the source of it. In fact, often when the part has been dismantled for other maintenance, its adjustment in relation to the engine flywheel may no longer be ideal, in which case the gears will be worn down as time passes and will not slip and will no longer properly engage the engine when starting. Check the condition of the drive pinion, if it is the part responsible of the starter motor noise on your Peugeot 2008 swap it.
If it is a noise in the front of your vehicle but it seems to you after reviewing not to come from your starter, consult this article about front end noise on Peugeot 2008 which may give you other leads to solve your noise trouble.
I acknowledge a clicking noise of the key running in my neiman but no noise at the starter motor of my Peugeot 2008
If you acknowledge a clicking noise at the starter motor of your Peugeot 2008, there are two possible failures related to this sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most classic ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You could have a trouble with unplugged cable check your electrical installation. If after examining this clicking noise on Peugeot 2008 doesn’t come from your starter motor, check this article for more informations.
