You hear a starter motor noise on your Nissan Murano when you start your vehicle. We can understand that this is not pleasant and that you have inquiries. Discovering such a noise is not always a good signal, but it may also be nothing severe. To assist you remedy this issue, our team has chosen to create this article content to support you in this research. First, we will detail how the starter motor works on your Nissan Murano, and then what starter motor noises you can experience on your Nissan Murano.
Functioning and various information
Function of a starter motor on Nissan Murano
The starter motor is an electric motor whose single job is to start the engine unit of your car. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link element between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Nissan Murano is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Nissan Murano
- Do not try to start your engine for too long
- Do not use a starter motor on Nissan Murano with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the weather conditions is too cold. You should not try to start for more than a few seconds or you will burn it.
Although when you have a battery that is tired, you always want to start your car, the energy it is capable of holding may not be sufficient to generate the power demanded by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not deal with the trigger of your failure to start repeatedly, your starter may be the future part you will have to change.
I hear noises from the starter motor of my Nissan Murano, what are the origins?
I experience a loud noise from the starter of my Nissan Murano
If you acknowledge a starter motor noise on Nissan Murano and you have the feeling that it is approaching a loud noise, it is conceivable that it is the starter motor gears that are at the origin of it. In fact, often when the component has been dismantled for other maintenance, its adjustment in relation to the engine flywheel may no longer be appropriate, in which circumstance the gears will be worn down after some time and will not slip and will no longer properly engage the engine when starting. Examine the condition of the drive pinion, if it is the element responsible of the starter motor noise on your Nissan Murano change it.
If it is a noise in the front of your car but it seems to you after examining not to come from your starter, browse this article content about front end noise on Nissan Murano which may give you other leads to eliminate your noise issue.
I hear a clicking noise of the key running in my neiman but no noise at the starter motor of my Nissan Murano
If you hear a clicking noise at the starter motor of your Nissan Murano, there are two possible failures associated with this indicator. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most classic ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You could have a issue with unplugged cable verify your electrical installation. If after checking this clicking noise on Nissan Murano doesn’t come from your starter motor, check this article for more informations.
