You listen to a starter motor noise on your Mitsubishi Outlander each time you start your car. We can understand that this is not agreeable and that you have inquiries. Experiencing such a noise is not always a good sign, but it may also be nothing major. To help you solve this trouble, our team has decided to write this content to assist you in this research. First, we will explain how the starter motor works on your Mitsubishi Outlander, and then what starter motor noises you can know on your Mitsubishi Outlander.
Functioning and various information
Function of a starter motor on Mitsubishi Outlander
The starter motor is an electric motor whose sole function is to start the engine motor of your car. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link component between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Mitsubishi Outlander is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Mitsubishi Outlander
- Do not try to start your engine for too long
- Do not use a starter motor on Mitsubishi Outlander with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the weather is too cold. You should not turn your key for more than a few seconds or you will burn it.
Although when you have a battery that is drained, you always want to start your car, the energy it is capable of holding may not be sufficient to give the power needed by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not fix the cause of your failure to start repeatedly, your starter may be the future part you will have to change.
I listen to noises from the starter motor of my Mitsubishi Outlander, what are the causes?
I experience a loud noise from the starter of my Mitsubishi Outlander
If you listen to a starter motor noise on Mitsubishi Outlander and you have the feeling that it is approaching a loud noise, it is possible that it is the starter motor gears that are at the source of it. Indeed, often when the component has been dismantled for other fixes, its adjustment in relation to the engine flywheel may no longer be ideal, in which circumstance the gears will be worn down over time and will not slip and will no longer properly activate the engine when starting. Examine the condition of the drive pinion, if it is the element responsible of the starter motor noise on your Mitsubishi Outlander replace it.
If it is a noise in the front of your car but it seems to you after examining not to come from your starter, consult this content about front end noise on Mitsubishi Outlander which may give you other leads to eliminate your noise trouble.
I listen to a clicking noise of the key running in my neiman but no noise at the starter motor of my Mitsubishi Outlander
If you listen to a clicking noise at the starter motor of your Mitsubishi Outlander, there are two possible failures associated with this indicator. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most traditional ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You might have a trouble with unplugged cable verify your electrical installation. If after examining this clicking noise on Mitsubishi Outlander doesn’t come from your starter motor, check this article for more informations.
