You experience a starter motor noise on your Mercedes Classe Glc when you start your car. We can understand that this is not enjoyable and that you have inquiries. Hearing such a noise is not always a good signal, but it may also be nothing serious. To help you remedy this issue, our team has chosen to write this content to help you in this research. First, we will detail how the starter motor works on your Mercedes Classe Glc, and then what starter motor noises you can encounter on your Mercedes Classe Glc.
Functioning and various information
Function of a starter motor on Mercedes Classe Glc
The starter motor is an electric motor whose sole job is to start the engine unit of your vehicle. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link element between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Mercedes Classe Glc is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Mercedes Classe Glc
- Do not try to start your engine for too long
- Do not use a starter motor on Mercedes Classe Glc with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the climate is too cold. You should not turn your key for more than a few seconds or you will burn it.
Although when you have a battery that is empty, you always want to start your vehicle, the energy it is capable of holding may not be good enough to give the power required by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not resolve the trigger of your failure to start repeatedly, your starter may be the future component you will have to change.
I experience noises from the starter motor of my Mercedes Classe Glc, what are the origins?
I feel a loud noise from the starter of my Mercedes Classe Glc
If you listen a starter motor noise on Mercedes Classe Glc and you have the feeling that it is close to a loud noise, it is plausible that it is the starter motor gears that are at the origin of it. In fact, often when the part has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be optimal, in which case the gears will be worn down with time and will not slip and will no longer properly activate the engine when starting. Examine the condition of the drive pinion, if it is responsible of the starter motor noise on your Mercedes Classe Glc change it.
If it is a noise in the front of your vehicle but it seems to you after examining not to come from your starter, read this content about front end noise on Mercedes Classe Glc which may provide you other leads to eliminate your noise issue.
I experience a clicking noise of the key running in my neiman but no noise at the starter motor of my Mercedes Classe Glc
If you experience a clicking noise at the starter motor of your Mercedes Classe Glc, there are two possible failures related to this symptom. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most typical ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You may have a issue with unplugged cable verify your electrical installation. If after checking this clicking noise on Mercedes Classe Glc doesn’t come from your starter motor, check this article for more informations.
