You listen a starter motor noise on your Mercedes Classe C 2 every time you start your car. We agree that this is not pleasant and that you have inquiries. Discovering such a sound is not always a good indication, but it may also be nothing serious. To help you remedy this trouble, our team has decided to write this content to assist you in this research. First, we will detail how the starter motor functions on your Mercedes Classe C 2, and then what starter motor noises you can experience on your Mercedes Classe C 2.
Functioning and various information
Function of a starter motor on Mercedes Classe C 2
The starter motor is an electric motor whose single role is to start the engine of your vehicle. By a magnetic system and a “serial” technology, it will launch an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link part between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Mercedes Classe C 2 is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Mercedes Classe C 2
- Do not run your starter too long
- Do not use a starter motor on Mercedes Classe C 2 with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the weather is too cold. You should not turn your key for more than a few seconds or you will burn it.
Although when you have a battery that is tired, you always want to start your vehicle, the energy it is capable of holding may not be sufficient to furnish the power required by the starter motor to start your engine. Repeated attempts will pre-use your starter motor and if you do not treat the trigger of your failure to start repeatedly, your starter may be the future element you will have to replace.
I listen noises from the starter motor of my Mercedes Classe C 2, what are the origins?
I feel a loud noise from the starter of my Mercedes Classe C 2
If you acknowledge a starter motor noise on Mercedes Classe C 2 and you have the feeling that it is close to a loud noise, it is conceivable that it is the starter motor gears that are at the origin of it. In fact, often when the component has been dismantled for other fixes, its adjustment in relation to the engine flywheel may no longer be ideal, in which situation the gears will be worn down over time and will not slip and will no longer properly activate the engine when starting. Examine the state of the drive pinion, if it is the element responsible of the starter motor noise on your Mercedes Classe C 2 change it.
If it is a noise in the front of your vehicle but it seems to you after examining not to come from your starter, browse this content about front end noise on Mercedes Classe C 2 which may provide you other leads to eliminate your noise trouble.
I listen a clicking noise of the key running in my neiman but no noise at the starter motor of my Mercedes Classe C 2
If you listen a clicking noise at the starter motor of your Mercedes Classe C 2, there are two possible failures relating to this warning sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most typical ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You may have a trouble with unplugged cable check your electrical installation. If after looking at this clicking noise on Mercedes Classe C 2 doesn’t come from your starter motor, check this article for more informations.
