You acknowledge a starter motor noise on your Mazda 2 once you start your automobile. We agree that this is not pleasant and that you have questions. Listening such a sound is not always a good sign, but it may also be nothing major. To support you solve this problem, our team has decided to write this article content to assist you in this research. First, we will explain how the starter motor functions on your Mazda 2, and then what starter motor noises you can discover on your Mazda 2.
Functioning and various information
Function of a starter motor on Mazda 2
The starter motor is an electric motor whose only task is to start the engine unit of your car. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link component between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Mazda 2 is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Mazda 2
- Do not try to start your engine for too long
- Do not use a starter motor on Mazda 2 with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the climate is too cold. You should not turn your key for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is tired, you always want to start your car, the energy it is capable of holding may not be enough to generate the power demanded by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not solve the cause of your failure to start repeatedly, your starter may be the future element you will have to swap.
I acknowledge noises from the starter motor of my Mazda 2, what are the origins?
I feel a loud noise from the starter of my Mazda 2
If you listen to a starter motor noise on Mazda 2 and you have the feeling that it is approaching a loud noise, it is conceivable that it is the starter motor gears that are at the source of it. Indeed, often when the part has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be appropriate, in which situation the gears will be worn down with time and will not slip and will no longer properly engage the engine when starting. Check the state of the drive pinion, if it is the component resposible of the starter motor noise on your Mazda 2 swap it.
If it is a noise in the front of your car but it seems to you after reviewing not to come from your starter, browse this article content about front end noise on Mazda 2 which may provide you other leads to resolve your noise problem.
I acknowledge a clicking noise of the key running in my neiman but no noise at the starter motor of my Mazda 2
If you acknowledge a clicking noise at the starter motor of your Mazda 2, there are two possible failures linked to this sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most common ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You might have a problem with unplugged cable examine your electrical installation. If after checking this clicking noise on Mazda 2 doesn’t come from your starter motor, check this article for more informations.
