You listen to a starter motor noise on your Hyundai Ix20 every time you start your car. We agree that this is not pleasant and that you have inquiries. Hearing such a noise is not always a good signal, but it may also be nothing serious. To help you fix this trouble, our team has chosen to create this content page to assist you in this research. First, we will describe how the starter motor functions on your Hyundai Ix20, and then what starter motor noises you can encounter on your Hyundai Ix20.
Functioning and various information
Function of a starter motor on Hyundai Ix20
The starter motor is an electric motor whose single task is to start the engine motor of your automobile. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link element between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Hyundai Ix20 is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Hyundai Ix20
- Do not try to start your engine for too long
- Do not use a starter motor on Hyundai Ix20 with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the temperature is too cold. You should not try to start for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is tired, you always want to start your automobile, the energy it is capable of holding may not be sufficient to generate the power demanded by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not deal with the reason of your failure to start repeatedly, your starter may be the future element you will have to replace.
I listen to noises from the starter motor of my Hyundai Ix20, what are the triggers?
I feel a loud noise from the starter of my Hyundai Ix20
If you experience a starter motor noise on Hyundai Ix20 and you have the feeling that it is approaching a loud noise, it is conceivable that it is the starter motor gears that are at the source of it. In fact, often when the component has been dismantled for other maintenance, its adjustment in relation to the engine flywheel may no longer be ideal, in which circumstance the gears will be worn down as time passes and will not slip and will no longer properly activate the engine when starting. Check the condition of the drive pinion, if it is responsible of the starter motor noise on your Hyundai Ix20 replace it.
If it is a noise in the front of your automobile but it seems to you after checking not to come from your starter, browse this content page about front end noise on Hyundai Ix20 which may give you other leads to fix your noise trouble.
I listen to a clicking noise of the key running in my neiman but no noise at the starter motor of my Hyundai Ix20
If you listen to a clicking noise at the starter motor of your Hyundai Ix20, there are two possible failures relating to this sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most common ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You may have a trouble with unplugged cable check your electrical installation. If after tracking this clicking noise on Hyundai Ix20 doesn’t come from your starter motor, check this article for more informations.
